76 280Z 2+2 fuel injector plastic injection holders

[bhermes]

OK, so I am wrapping up getting the 76z ready for sale.  Obviously taking my time to part ways.

I am installing my fuel injector / railing and one of the plastic injector holders broke.  I am pretty sure that all of the parts including the injectors were original.

I am having trouble locating the proper part to purchase.

Any help would be appreciated.

Thanks.

[siteunseen]

These are $6.99 plus shipping. You might find them cheaper on Ebay. Good luck and I hope she sales quick too.

 

https://zcardepot.com/products/fuel-injector-base-holder-trigger-280z-280zx-75-83?variant=19274253729905&currency=USD&utm_source=google&utm_medium=cpc&utm_campaign=google+shopping&gclid=EAIaIQobChMI6NSWrejl8QIV8QaICR2uBQ08EAQYASABEgK6f_D_BwE

Edited July 15, 2021 by siteunseen

[Zed Head]

And MSA.

https://www.thezstore.com/page/TZS/PROD/11-3491

Rockauto.  I'll bet your local auto parts store might even have them.  NAPA maybe.  Give them the  Standard part number and they can cross-ref.

https://www.rockauto.com/en/catalog/nissan,1976,280z,2.8l+l6,1209226,fuel+&+air,fuel+injector+seal+/+o-ring,13679

 

Edited July 15, 2021 by Zed Head

[gwri8]

I believe the original fuel injector holders were a 2 piece metal item, steel ring and an aluminum mounting block.   The plastic ones work fine but are easy to crack and break with too much torque when mounting them.

[bhermes]

Thanks to everyone for such a quick response.  I did not notice the additional responses and have already ordered the ones from zcardepot.

[siteunseen]

I rember the plastic and the metal hold down piece.

The zcardepot ones hopefully come with the rubber O-rings. You can use the old ones just be careful removing them from the old injectors. Try spinning them loose while they're still on instead of prying them off with a screwdriver.