Jump to content
Email-only Log-Ins Coming in December ×

IGNORED

‘71 sputters going uphill


shoehorn_hands

Recommended Posts

Hi fellow Z lovers,

I recently bought a ‘71 and am using it as a daily driver. The car is generally in pretty good condition and runs well for the most part but sputters/jerks/misfires(?) while going uphill.  This usually happens while within 10% of 65 MPH/3500 RPM. So far it hasn’t completely died yet but it doesn’t feel, sound, or look good when it happens. I’m worried about it.

The car has a rebuilt, non-original L24 with about 45k post re-build.

What should I be looking out for?

Link to comment
Share on other sites

Might be the carbs - have you tuned them? They might not be balanced, or the mixture could be off. I had similar issues, and a good tune helped a lot. Though I never had sputters from hills and hills alone - it was more a rpm/throttle input thing in general. My mixture was off, I reckon. Sputters are much rarer now that I've gotten things pretty dialed in.

  • Like 1
Link to comment
Share on other sites

I had the same problem going up steep inclines. The front carb would run dry and then it only ran on the back 3 cylinders. I could roll the car backwards and cut the wheel making it perpendicular in the road, let the front carb fill back up and it ran fine for another mile or two. My floats were way off but once I got those adjusted properly I went straight back to Cheaha Mountain and "tested" it. Pulled up that thing like a mule, no sputter whatsoever.

The quick and easy way to get an idea where your's are is the clear hose method.

float level.png

Edited by siteunseen
  • Like 3
Link to comment
Share on other sites

1 hour ago, siteunseen said:

I had the same problem going up steep inclines. The front carb would run dry and then it only ran on the back 3 cylinders. I could roll the car backwards and cut the wheel making it perpendicular in the road, let the front carb fill back up and it ran fine for another mile or two. My floats were way off but once I got those adjusted properly I went straight back to Cheaha Mountain and "tested" it. Pulled up that thing like a mule, no sputter whatsoever.

The quick and easy way to get an idea where your's are is the clear hose method.

float level.png

So you would do half a K turn and block traffic while your carb refilled - lol

  • Agree 1
  • Haha 1
Link to comment
Share on other sites

11 minutes ago, shoehorn_hands said:

Thanks for the help! What is a good source for information on how to tune the carbs?

https://www.youtube.com/watch?v=F4JVwqu8dgo&t=343s&ab_channel=LivingWithAClassic and https://zcarguide.com/tuning-adjusting-datsun-240z-su-carburetors/ The video and guide are how I learned. I was running in circles for a while on my first tune, then everything kinda clicked. 

 

  • Thanks 1
Link to comment
Share on other sites

On 9/4/2021 at 4:25 AM, siteunseen said:

I had the same problem going up steep inclines. The front carb would run dry and then it only ran on the back 3 cylinders. I could roll the car backwards and cut the wheel making it perpendicular in the road, let the front carb fill back up and it ran fine for another mile or two. My floats were way off but once I got those adjusted properly I went straight back to Cheaha Mountain and "tested" it. Pulled up that thing like a mule, no sputter whatsoever.

The quick and easy way to get an idea where your's are is the clear hose method.

float level.png

Where does one find a clear fuel hose like this?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Privacy Policy and Guidelines. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.