Does anyone know if there is an aftermarket replacement panel for the lower inboard radiator support?

Edited September 25, 20213 yr by DC871F

A quick google, I was looking for Tabco but they don't have anything. Good luck!

https://www.google.com/search?q=datsun+280z+lower+radiator+support&client=ms-android-americamovil-us-revc&ei=OYZPYc-qGt2awbkPxYWoqAY&oq=datsun+280z+lower+rad&gs_lcp=ChNtb2JpbGUtZ3dzLXdpei1zZXJwEAEYATIFCCEQoAEyBQghEKABMgUIIRCgATIICCEQFhAdEB4yCAghEBYQHRAeOgQIABBHOgYIABAHEB46BQgAEM0COgQIABANOggIABANEAUQHjoFCAAQgAQ6BggAEAUQHjoICAAQBxAFEB46BAgeEAo6BwghEAoQoAE6BQghEKsCOgYIABAWEB5QlxRYu-YBYPj3AWgBcAF4AIAB0wGIAaEokgEGMi4zNi4xmAEAoAEByAEIwAEB&sclient=mobile-gws-wiz-serp

  On 9/25/2021 at 8:31 PM, siteunseen said:

 

I have been watching a video series on youtube from Japan of a 240z restoration, and they found one somewhere. I'm pretty sure it was a new piece since there werent any drill holes and cuts in it.

Been working on other areas of my 73 restoration and mentally put that panel on the backburner figuring I'd have to scratch build it.

Edited September 25, 20213 yr by DC871F

Looks like Auto Panel Solutions in the UK makes a panel for that, although it doesn't look to be identical, if that's what your standard is. 

https://www.facebook.com/Auto-Panel-Solutions-418351785395614/

I think it is for the 260-280, so some slight differences from the 240.

 

  On 9/25/2021 at 9:45 PM, Terrapin Z said:

I think it is for the 260-280, so some slight differences from the 240.

 

Its for 260, but the bottom piece I'm looking for seems very close to working wtih a little massaging. That NOS, hate to cut it up. 

  On 9/25/2021 at 8:40 PM, DC871F said:

I have been watching a video series on youtube from Japan of a 240z restoration, and they found one somewhere. I'm pretty sure it was a new piece since there werent any drill holes and cuts in it.

Been working on other areas of my 73 restoration and mentally put that panel on the backburner figuring I'd have to scratch build it.

Any chance it's called '51 Machines'?  If so, they are doing some amazing work on a very tired 240.

  On 9/25/2021 at 9:56 PM, ETI4K said:

Any chance it's called '51 Machines'?  If so, they are doing some amazing work on a very tired 240.

Yes it is. That dude is amazing.

I've learned a lot watching, but I don't see how they keep that car straight with all the metal they've cut out.

 

  On 9/25/2021 at 10:09 PM, ETI4K said:

I've learned a lot watching, but I don't see how they keep that car straight with all the metal they've cut out.

 

Its bolted to a frame jig. About half way through the video's he put it on the jig and straighten the car than started cutting the front.

Edited September 25, 20213 yr by DC871F

👍

  On 9/25/2021 at 9:53 PM, DC871F said:

Its for 260, but the bottom piece I'm looking for seems very close to working wtih a little massaging. That NOS, hate to cut it up. 

Agreed, you would not want to cut up a NOS part for just a small section of it. I couldn't see the whole part in you pic. I just thought I would throw it out there. 

I have a 260Z I am parting as well I PM'ed you some pics of that.