November 2, 20213 yr comment_630878 A heat gun might help Link to comment https://www.classiczcars.com/forums/topic/65957-280z-bumper-conversion-who-kept-280z-lower-valence/?&page=5#findComment-630878 Share on other sites More sharing options...
November 2, 20213 yr comment_630879 That looks good Ferg! I've had a few cold ones too so we're looking through the same goggles as this guy. Â Link to comment https://www.classiczcars.com/forums/topic/65957-280z-bumper-conversion-who-kept-280z-lower-valence/?&page=5#findComment-630879 Share on other sites More sharing options...
November 5, 20213 yr comment_631015 @Av8ferg I do not have a suitable lower valence corner. I thought I had two but the only one I could locate was pretty rusty along the edge Charles Link to comment https://www.classiczcars.com/forums/topic/65957-280z-bumper-conversion-who-kept-280z-lower-valence/?&page=5#findComment-631015 Share on other sites More sharing options...
November 5, 20213 yr comment_631016 [mention=32672]Av8ferg[/mention] I do not have a suitable lower valence corner. I thought I had two but the only one I could locate was pretty rusty along the edge CharlesCharles, thanks for looking I really appreciate that ! Sent from my iPhone using Tapatalk Link to comment https://www.classiczcars.com/forums/topic/65957-280z-bumper-conversion-who-kept-280z-lower-valence/?&page=5#findComment-631016 Share on other sites More sharing options...
November 12, 20213 yr Author comment_631447 On 10/25/2021 at 2:25 PM, Av8ferg said: Good discussion and timely for me. I recently bought the xenon front air dam. Bought it direct from Xenon and I’m so disappointed I don’t have words . It’s not even usable. It so warped that it’s unusable. It has flaws all over it. I’d avoid this product like Covid-19. I’ll post pics of this garbage later. My stock lower valance is banged up so I started looking for alternatives. I think I may have found it and might be something you like. I think it’s was used on the European 260’s. Take a look at these pics. Wish I had better one but this is probably what I’m getting. Sent from my iPhone using Tapatalk @Av8ferg is there a kit for this 260z front end? Never seen one of these for sale Link to comment https://www.classiczcars.com/forums/topic/65957-280z-bumper-conversion-who-kept-280z-lower-valence/?&page=5#findComment-631447 Share on other sites More sharing options...
November 12, 20213 yr comment_631448 They’re out there but you’ll have to dig a little. I’ve got my xenon bolted on and it’s beginning to grow on me, even after I dropped my stock lower valance and one part I bought online to the paint shop. I’ll have two options now. https://www.ebay.com/itm/122821181596https://jdm-car-parts.com/collections/datsun-240z-260z-280z-280zx-nissan-fairlady-z/products/datsun-240z-260z-280z-uk-euro-spec-oem-front-spoiler?variant=788903109Sent from my iPhone using Tapatalk Link to comment https://www.classiczcars.com/forums/topic/65957-280z-bumper-conversion-who-kept-280z-lower-valence/?&page=5#findComment-631448 Share on other sites More sharing options...
November 12, 20213 yr Author comment_631451 1 hour ago, Av8ferg said: https://jdm-car-parts.com/collections/datsun-240z-260z-280z-280zx-nissan-fairlady-z/products/datsun-240z-260z-280z-uk-euro-spec-oem-front-spoiler?variant=788903109  Love this EU front spoiler. They make a carbon fiber variant which would be a nice accent Link to comment https://www.classiczcars.com/forums/topic/65957-280z-bumper-conversion-who-kept-280z-lower-valence/?&page=5#findComment-631451 Share on other sites More sharing options...
November 13, 20213 yr comment_631474 Love this EU front spoiler. They make a carbon fiber variant which would be a nice accent I agree, I wonder if it fits on the stock 280z lower valance? It’s would be perfect for what I want. The BRE is just a little to big. Sent from my iPhone using Tapatalk Link to comment https://www.classiczcars.com/forums/topic/65957-280z-bumper-conversion-who-kept-280z-lower-valence/?&page=5#findComment-631474 Share on other sites More sharing options...
November 14, 20213 yr comment_631543 So EuroDat had mentioned that a 240z stock from valance was too short to fit and the the Radiator brace hung too low. These pic below are from Sean at Zstory. I have been chatting with him about mufflers and he sent me pics of his cars front. It’s a 280z he imported from the US and then put the 240z front on. I asked him about it and he said it fit fine. I wonder if he’s just covering the lower radiator brace with the lip he put under the valance. He sent me these pics. Sent from my iPhone using Tapatalk Link to comment https://www.classiczcars.com/forums/topic/65957-280z-bumper-conversion-who-kept-280z-lower-valence/?&page=5#findComment-631543 Share on other sites More sharing options...
November 14, 20213 yr comment_631545 Sean is using an extended 280Z grill and an aftermarket 240Z air-dam. If you want to use the original 240Z valance it will not fit. The center section should go under the radiator body frame, but with the lower 280Z radiator body frame it is impossible. You can see on the last photo Sean's Air dam top section of the air gap is in line with the top section of that body frame. The extra lip on the air-dam drops down enough the cover the frame from visability. It is not an original 240Z valance. That is why I used the 240Z air-dam and extended a 240Z grill by adding 2 extra horizontal bars. The air-dam I chose still needed some relief along the back edge to clear the 280Z radiator body frame. Keeping the origjnal indicators or using the 240Z indicators under the bumper is personal preference. I fitted a 240Z valance to mine, but the ceter section would not fit. See photo. The yellow line is where the center section bottom edge would hit the frame. Unfortunatly I don't have any photos of mine attempts to hold it in place.   Link to comment https://www.classiczcars.com/forums/topic/65957-280z-bumper-conversion-who-kept-280z-lower-valence/?&page=5#findComment-631545 Share on other sites More sharing options...
November 14, 20213 yr comment_631546 Chas, makes sense.  Thanks for making it 100% clear.  I’m sure a lot of people will have the same questions about this and it’s clearly spelled out in this thread.  It’s a good look for sure.  Link to comment https://www.classiczcars.com/forums/topic/65957-280z-bumper-conversion-who-kept-280z-lower-valence/?&page=5#findComment-631546 Share on other sites More sharing options...
December 16, 20213 yr Author comment_633219 Just got my xenon 3125 drop shipped from xenon through an eBay reseller. Packaging seemed much nicer than your experience @Av8ferg My wife’s cat for scale Link to comment https://www.classiczcars.com/forums/topic/65957-280z-bumper-conversion-who-kept-280z-lower-valence/?&page=5#findComment-633219 Share on other sites More sharing options...
Create an account or sign in to comment