foosman Posted November 29, 2021 Share #1 Posted November 29, 2021 Ordered up a set of stock reman calipers from Autozone - picture on the website shows Sumitomo castings for the housings, but the ones I received have no such "SUMITOMO" markings. They visually match the Sumitomos that I currently have, other than the 20 years of rust on my originals, so it's not like they shipped me the entirely wrong calipers. Did someone start reproducing generic housings for these calipers at some point? I'm inclined to return them, and keep looking for ones with the correct Sumitomo castings - if anyone has good/bad experience with the various remans (Nugeon, Cardone, Centric, etc.) for these, I'd appreciate the info. Link to comment Share on other sites More sharing options...
Michaelwk Posted March 12, 2022 Share #2 Posted March 12, 2022 @foosman Checking in to see if you installed these. Any issues? Looking at them as well. Link to comment Share on other sites More sharing options...
dutchzcarguy Posted March 12, 2022 Share #3 Posted March 12, 2022 I would bring them to a reman. shop.. there should be one in your neighbourhood? Link to comment Share on other sites More sharing options...
mayolives Posted March 12, 2022 Share #4 Posted March 12, 2022 l Last year I purchased Carquest calipers from Advance Auto for my 73 240. The fit right and worked well. Link to comment Share on other sites More sharing options...
Reptoid Overlords Posted March 12, 2022 Share #5 Posted March 12, 2022 (edited) I got these for the front of my ZX last week and they seem to be working so far. Only about 150 miles on them so who knows if they'll last. Just went on a 75 mile drive this morning with no issues. most of the problems I was having was in relation to the flex lines failing internally causing the calipers to drag. The stock front calipers were pitted in the cylinder bores so I replaced them. https://www.autozone.com/brakes-and-traction-control/brake-caliper-front/p/duralast-brake-caliper-19-b154/565598_0?rrec=true Edited March 12, 2022 by Reptoid Overlords Link to comment Share on other sites More sharing options...
foosman Posted March 12, 2022 Author Share #6 Posted March 12, 2022 7 hours ago, Michaelwk said: @foosman Checking in to see if you installed these. Any issues? Looking at them as well. I installed them, but it'll be some time before I have any experience with them. The core charge was only $11 or so, so I kept the originals too. Link to comment Share on other sites More sharing options...
siteunseen Posted March 12, 2022 Share #7 Posted March 12, 2022 I put them on mine, work great so far and that was 2016? Cleaned them with a wire brush and painted red. Looks good with my Rewind wheels. Get those short flex lines off ebay foe a lot cheaper. Same hoses... Link to comment Share on other sites More sharing options...
Michaelwk Posted March 13, 2022 Share #8 Posted March 13, 2022 9 hours ago, dutchzcarguy said: I would bring them to a reman. shop.. there should be one in your neighbourhood? I can't imagine they'd be cheaper than $33 (or still even $44 if I send in my cores). 1 Link to comment Share on other sites More sharing options...
siteunseen Posted March 13, 2022 Share #9 Posted March 13, 2022 They're bare when you get them so you need to finish coat with something to keep rust and crud at a minimum. There's a lot of color choices... https://www.ebay.com/itm/233537813436 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now