What are these tubes for? At first I thought maybe for air release when the hatch is closed but I thought that's what the holes behind the C pillar emblems were for.  Car is a 1976 280z that I am getting ready for paint and if these don't serve any purpose for me I'm going to cut them off and weld closed.  I am using a plastic Camaro fuel tank if that matters.

 

 

 

Looks like where fuel tank vent hoses come through to the evap tank.

@Zed Head will know, he has a '76.

I believe those are where the tank vent lines go down through the floor from the vent tank

Yes, that's what they are.

Thanks guys.  Do they go behind the plastic trim piece that covers the back of the taillights?  Or are they exposed?  If exposed I'm going to remove them

Edited February 5, 20223 yr by fusion

5 minutes ago, fusion said:

Do they go behind the plastic trim piece that covers the back of the taillights?

Yes.  Easier to just plug them to block fumes and leave them for someone down the line who might go resto on the car.  Plus, they're good ports for electrical wires in the future.

18 hours ago, fusion said:

Thanks guys.  Do they go behind the plastic trim piece that covers the back of the taillights?  Or are they exposed?  If exposed I'm going to remove them

As Zed said ^ They are behind the plastic panel in the rear, and the one on the right rear, where the vent tank sits. 

If you are not using the tank I would look for some rubber caps to seal them off.