zed2 Posted February 20, 2022 Share #1 Posted February 20, 2022 Does any have a source for the clear washer used to attach the lower door panel on the Series 1 cars? Thanks, Keith Link to comment Share on other sites More sharing options...
dutchzcarguy Posted February 21, 2022 Share #2 Posted February 21, 2022 Don't know exactly what you mean with a "clear washer" .. i think a washer from colourless plastic? I needed a colourless plastic round sticker for on the paint where the rubber of the tailgate comes when you close it.. and i found one in the giant stock of my painter, he has the straingest parts for cars in many many assortment boxes.. Maybe your painter has some for you.. Link to comment Share on other sites More sharing options...
26th-Z Posted February 21, 2022 Share #3 Posted February 21, 2022 I tried McMaster-Carr for countersunk finishing washers. Found white ones, but not clear. Hmmm... Link to comment Share on other sites More sharing options...
dutchzcarguy Posted February 21, 2022 Share #4 Posted February 21, 2022 (edited) Maybe you can make some out of plexiglas on a lath.. @Captain Obvious? Can you give some exact dimensions? Edited February 21, 2022 by dutchzcarguy Link to comment Share on other sites More sharing options...
Bonzi Lon Posted February 21, 2022 Share #5 Posted February 21, 2022 With a small lathe, one could use a small clear dress button to start with. Bonzi Lon Link to comment Share on other sites More sharing options...
AZ-240z Posted February 21, 2022 Share #6 Posted February 21, 2022 On 2/20/2022 at 11:26 AM, zed2 said: Does any have a source for the clear washer used to attach the lower door panel on the Series 1 cars? Thanks, Keith If you want to take a deep dive into these door panel screws and finish washers, here is a thread I started about 16 years ago. 1 1 Link to comment Share on other sites More sharing options...
zKars Posted February 21, 2022 Share #7 Posted February 21, 2022 10mm outside diameter. Seem them on the couple of 69 510’s I’ve worked on recently as well doing the same duty. 1 1 Link to comment Share on other sites More sharing options...
zKars Posted February 22, 2022 Share #8 Posted February 22, 2022 Lest we forget... Link to comment Share on other sites More sharing options...
siteunseen Posted February 22, 2022 Share #9 Posted February 22, 2022 Another temporary option after a little filing. 3 Link to comment Share on other sites More sharing options...
26th-Z Posted February 23, 2022 Share #10 Posted February 23, 2022 What are those? Lifesavers? You nut! Thanks for the pictures. I'm going to write to a guy and see if I can have them made. 2 1 Link to comment Share on other sites More sharing options...
Popular Post psdenno Posted February 23, 2022 Popular Post Share #11 Posted February 23, 2022 3 hours ago, 26th-Z said: What are those? Lifesavers? You nut! Thanks for the pictures. I'm going to write to a guy and see if I can have them made. Actually, you can modify them yourself. Step 1: Remove from wrapper. Step 2: Insert in mouth. Step 3: Remove from mouth when desired reduced size is achieved.. Warning: Leaving in mouth too long will make them disappear. 😎 5 Link to comment Share on other sites More sharing options...
siteunseen Posted February 24, 2022 Share #12 Posted February 24, 2022 22 hours ago, psdenno said: Step 3: Remove from mouth when desired reduced size is achieved.. That's what she said. 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now