I've taken on a restoration on a 78 280Z that was partially completed in 2000 and Im attempting to finish it 22 years later. Im missing a few parts and hopefully someone may have these.. As of now Im looking for:

Blower resistor for AC car with 6 pin connector 

Linkage from bellcrank to EFI rod at firewall

Vapor canister clamp

Please let me know if you would be willing to sell these parts. 

Thanks! 

 

I should have the clamp and possibly the resistor. I'll check and let you know tonight. 

I have this canister bracket off my 82 ZX, funny the part numbers I looked up was a 14915-N3600 for ->78 and then the 82ZX was a 14951-N3600 They look the same, so I am thinking one is a typo. The canisters look the same, they just mount them in different spots. 

I have 4 wire (4 pin) and a 5 wire (6 pin connector) resistors. Untested but look intact. 

If you're interested....

 

Thanks for looking.  Do you mind measuring the inner diameter and the hole spacing on the bracket?  How much for the bracket and a 5 wire resistor?

I'm coming up with about 5" diameter clamped. The side to side is 1" and the up/down is 1.75"

Here are pics of the resistor too.....

If you can find a pic of what you need for the linkage I can look for that too. 

I will PM a price based on what I'm shipping (weight and size)

 

 

PM sent

 

I have an extra 280z carbon canister clamp.  I also have a newly plated throttle linkage rod.  Not sure if you got what you needed already.  

Edited March 25, 20222 yr by Av8ferg

On 3/24/2022 at 9:39 PM, Av8ferg said:

I have an extra 280z carbon canister clamp.  I also have a newly plated throttle linkage rod.  Not sure if you got what you needed already.  

I did end up getting it but thanks a lot for looking.