A few 280Z parts needed

[Zaspen]

I've taken on a restoration on a 78 280Z that was partially completed in 2000 and Im attempting to finish it 22 years later. Im missing a few parts and hopefully someone may have these.. As of now Im looking for:

Blower resistor for AC car with 6 pin connector 

Linkage from bellcrank to EFI rod at firewall

Vapor canister clamp

Please let me know if you would be willing to sell these parts. 

Thanks! 

 

[Terrapin Z]

I should have the clamp and possibly the resistor. I'll check and let you know tonight. 

[Terrapin Z]

I have this canister bracket off my 82 ZX, funny the part numbers I looked up was a 14915-N3600 for ->78 and then the 82ZX was a 14951-N3600 They look the same, so I am thinking one is a typo. The canisters look the same, they just mount them in different spots. 

I have 4 wire (4 pin) and a 5 wire (6 pin connector) resistors. Untested but look intact. 

If you're interested....

 

[Zaspen]

Thanks for looking.  Do you mind measuring the inner diameter and the hole spacing on the bracket?  How much for the bracket and a 5 wire resistor?

[Terrapin Z]

I'm coming up with about 5" diameter clamped. The side to side is 1" and the up/down is 1.75"

Here are pics of the resistor too.....

If you can find a pic of what you need for the linkage I can look for that too. 

I will PM a price based on what I'm shipping (weight and size)

 

 

[Terrapin Z]

PM sent

 

[Av8ferg]

I have an extra 280z carbon canister clamp.  I also have a newly plated throttle linkage rod.  Not sure if you got what you needed already.  

Edited March 25, 2022 by Av8ferg

[Zaspen]

On 3/24/2022 at 9:39 PM, Av8ferg said:

I have an extra 280z carbon canister clamp.  I also have a newly plated throttle linkage rod.  Not sure if you got what you needed already.  

I did end up getting it but thanks a lot for looking.