Quarter Window Screw Size

[Freez74]

I am removing my quarter windows to replace the rubber.  I managed to get the retainer screws out without breaking them, but damaged the heads.  I would like to know the diameter and pitch of these tiny screws so I can replace them.

Thanks!

[SteveJ]

I'm not sure about the screw size/type, but I do suggest getting some JIS screwdrivers to reduce the chances of messing up the heads in future.

[CanTechZ]

According to the parts book they are M4. The pitch should be 0.7mm. Plus one on the JIS screwdrivers.

Edited April 2, 2022 by CanTechZ

[Freez74]

M4, .7, thanks!  I do have the JIS screwdriver, without it I would never have been able to budge them.  But, as I was removing them they were very tight, and the heads seemed rather soft and began to deform.  I cleaned and oiled the threads as much as possible.  Just glad I got them out, but would like to put new ones in if I can find them.  The search is on.

 

Thanks again!