I am removing my quarter windows to replace the rubber.  I managed to get the retainer screws out without breaking them, but damaged the heads.  I would like to know the diameter and pitch of these tiny screws so I can replace them.

Thanks!

I'm not sure about the screw size/type, but I do suggest getting some JIS screwdrivers to reduce the chances of messing up the heads in future.

According to the parts book they are M4. The pitch should be 0.7mm. Plus one on the JIS screwdrivers.

Edited April 2, 20223 yr by CanTechZ

M4, .7, thanks!  I do have the JIS screwdriver, without it I would never have been able to budge them.  But, as I was removing them they were very tight, and the heads seemed rather soft and began to deform.  I cleaned and oiled the threads as much as possible.  Just glad I got them out, but would like to put new ones in if I can find them.  The search is on.

 

Thanks again!