Jump to content

Featured Replies

I am trying to get some help on finding a way to either fix my existing stock turbo charger (looks like may have some broken compressor blades, and is very sloppy in the bearing).

any one know of a good stock replacement? I am not looking for an upgrade as I want to keep the orig EFI system intact. Hopefully a direct bolt in replacement. OR should I get it rebuilt? if so any recommendations for a rebuilder?


Was going to recommend you call Turbo City in CA for a stock garrett T3.  But it looks like they are no longer in business.

Maybe look on HybridZ for a source.   Don't be tempted to buy a cheap chinese knockoff from ebay.  

What about a T3 rebuild kit Dave?    After the 5 speed rebuild you did, the turbo should be a piece of cake..  LOL

Make certain the oil feed line is in good shape or replace it..   One of the big causes of turbo failure.

https://www.amazon.com/Turbo-Charger-Repair-Rebuild-Garrett/dp/B07SCGSTS4?th=1

We can help with rebuilding your factory turbo if you are interested. Typical turn around time is about 6 weeks. 

 

Here is our web link: https://www.thezstore.com/page/TZS/PROD/classic18d/10-2103

I found the PN KL1669 and 410581-3 for garrett on the turbo tag.

I think I found a CHRA that should work for about 300$

Garrett TB0306 CHRA Cartridge 410581-0007 (invasionautoproducts.com)

I am using this as a cross

NISSAN410581-000314420P9000CHRAN/ATB0306USE 410581-0007

This is turning into quite a research process to run down the needed part.

 

Create an account or sign in to comment

Important Information

By using this site, you agree to our Privacy Policy and Guidelines. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.