Existing FS5W71B Bearing/Seal Size Inventory?

[Matthew Abate]

I am having a FS5w71B transmission rebuilt and I am trying to provide the shop with a complete inventory of bearing and seal sizes before they open it up. Has anyone already done this? I have the part numbers for all of this stuff taken from the Car Parts Manual site, but that doesn't give me the ID/OD/Width info and weather or not any of them are sealed.

I suppose I could just get a rebuild kit, but I wanted to have this on hand to ensure everything goes smoothly once they get to it. Does anyone have this info on hand? I've dug through the forum and can't find it.

Edited July 31, 2022 by Matthew Abate

[Zed Head]

@EuroDat did, I think.  I tried to find it but can't.  It should be in the Downloads area somewhere but I can't figure out how things are categorized there.  Don't know how to search just the Downloads area either.

Anyway, it's out there somewhere.

[Zed Head]

Found a link.  I don't know if this has been uploaded to the site or not.  Post #45 has a pdf file you can open.

 

[EuroDat]

@Zed Head Hi ZH, It is in the Tech Articles, but what you say is true. I find it difficult to find stuff in the Resource section.

[EuroDat]

1 hour ago, Matthew Abate said:

I am having a FS5w71B transmission rebuilt and I am trying to provide the shop with a complete inventory of bearing and seal sizes before they open it up. Has anyone already done this? I have the part numbers for all of this stuff taken from the Car Parts Manual site, but that doesn't give me the ID/OD/Width info and weather or not any of them are sealed.

I suppose I could just get a rebuild kit, but I wanted to have this on hand to ensure everything goes smoothly once they get to it. Does anyone have this info on hand? I've dug through the forum and can't find it.

None of the original bearings were sealed.

If you source aftermarket o-rings and seals, make sure they are NBR or viton (FKM / FPM).

[heyitsrama]

Ohh I just did this, I would use Eurodats part list for OEM part numbers, or on the right side it has the bearing number (e.g. 6305 c3) and order high quality bearings from an online distributor. 

I bought a bk104 bearing from Transmission Parts Distributors it had one wrong size bearing, it gave me a larger bearing for the fs5w71c. All of the bearings in this kit were from Nachi, they were very smooth.

[Matthew Abate]

Thanks for the help everyone!

I went ahead and made an updated version of EuroDat's spreadsheet with links to where I was able to source OEM Nissan parts so peope can copy the part numbers instead of transcribing them from the screenshot. I didn't get everything on the list, and some of them may not pan out (the ones from Amayama Japan / Part Souq, specifically) but I have a ton of this stuff on order. I'll let you know how it goes.

FS5W71B Rebuild Parts List
Fiche ID	Nissan Part Nr.	Replacement	Description	Nissan	Amayama Japan		Amazon	Ebay	Size	QTY	Notes
Tranmission Gear
32203 *	32273-N4800		BEARING - Main Input Shaft		Amayama Japan		Amazon		ID 30 x OD 72 x W 19mm	1	6306 NR C3 (with snap ring)
32276 *	32273-36900		BEARING - Main Input Shaft, Adapter Plate		Amayama Japan			Ebay	ID 30 x OD 72 x W 19mm	1	6306 C3
32275 *	32203-14360		BEARING - Main Input Shaft, Extension Housing	Courtesy Parts	Amayama Japan			Ebay	ID 25 x OD 52 x W 15mm	1	6205 C3
32272 *	32272-36910		BEARING - Pilot, Input / Output Shafts		Amayama Japan			Ebay	Needle	1	Same as BEARING - Reverse Idler Gear
32264R / M / U	32264-14601		BEARING - Needle, Main Shaft Gears	Nissan World	Amayama Japan			Ebay		3	1st, 2nd, & 3rd
32604M *	32604-P0100		RING - Baulk, 1st, 2nd, 3rd, & 4th Gears	Courtesy Parts	Amayama Japan					4
32544 *	32604-E9801	32604-36N21	RING - Baulk, 5th Gear		Amayama Japan					1
32241B	32354-E9803		NUT - Main Shaft, Left Hand Thread		Amayama Japan					1	280ZX Close Ratio 5-Speed
32241B	32354-A7400		NUT - Main Shaft, Right Hand Thread							1	280Z Wide Ratio 5-Speed NLA
32241B	32354-E9804		NUT - Main Shaft, Right Hand Thread (Early 280zx)							1	Replaces 32354-E9800 & 32354-E9802 NLA
Counter Gears
32219 *	32219-E9020		BEARING - Counter Shaft, Front	Courtesy Parts	Amayama Japan		Amazon (CA)		ID 22 x OD 56 x W 16mm	1	63 / 22 C3
32219M *	32203-E9800		BEARING - Counter Shaft, Adapter		Amayama Japan		Amazon		ID 25 x OD 62 x W 17mm	1	6305 C3
32231 *	32319-N4870		BEARING - Counter Shaft, Rear		Amayama Japan	Part Souq			ID 20 x OD 47 x W 14mm	1	6204 C3
32283 *	32272-36910		BEARING - Reverse Idler Gear		Amayama Japan			Ebay	Needle	1	Same as BEARING - Pilot, Input / Output Shafts
32210A	32236-E9500		NUT - Counter Shaft, Right Hand Thread	Nissan World	Amayama Japan					1
Transmission Case
32112 *	32112-08U01		GASKET - Front Cover	Courtesy Parts	Amayama Japan					1	Replaces 32112-E9001
32137 *	32137-E9000		OIL GUTTER	Courtesy Parts	Amayama Japan					1
32113 *	32114-Y4000		SEAL - Front (NOK: AH1679G)	Courtesy Parts	Amayama Japan		Amazon		30 / 45 x 8mm	1
32136 *	32136-U010A		SEAL - Rear Extension (NOK: 400402N)	Courtesy Parts	Amayama Japan		Amazon		35 / 50 x 11mm	1	Replaces 32114-20100 & 32114-E9000
-	NISSAN-62		BUSHING - Rear Extension (Omega Machine & Tool P/N: 71411)						ID 35mm	1	DON'T USE (SKU: 303066)
Transmission Shift Control
32849C	32855-H1010		BUSHING - Control Pin	Courtesy Parts	Amayama Japan					2
32861	32861-N4200		BUSHING - Control Lever	Courtesy Parts	Amayama Japan					1
32862	32862-E9801		BOOT - Control Lever	Courtesy Parts	Amayama Japan					1
32850H	32858-U6702		SEAL - Striking Rod, Inner						14/20 4.2mm	1
32710N	32710-14600		SEAL (O-RING) - Striking Rod, Outer	Courtesy Parts	Amayama Japan				24 x 2.5mm	1	Same as Speedo O-Ring
-	NLA		SEAL (O-RING) - Reverse Checking Assembly						22 x 2.5mm	1
32852	32852-24901		SPRING - Return		Amayama Japan					1
32831N	32830-20100		SPRING - Checking	Courtesy Parts	Amayama Japan					3
Speedo
32703	32703-78101		PINION - Speedometer, 17T (Black)	Nissan World	Amayama Japan				3.54:1 Diff.	1
32703	32703-78102		PINION - Speedometer, 18T (White)	Courtesy Parts	Amayama Japan				3.70:1 Diff.	1
32710	32710-14600		SEAL (O-RING) - Speedometer Pinion	Courtesy Parts	Amayama Japan				24 x 2.5mm	1	Same as Striking Rod O-Ring
32709	32709-14600		SEAL - Speedometer Pinion	Courtesy Parts	Amayama Japan				10/16 x 4.2mm	1
* = Parts in Major Overhaul Kits
Red = Parts No Longer Available Through Nissan
O-Ring Sizes are Inner Diameter + Cross Section

Edited August 5, 2022 by Matthew Abate

[Matthew Abate]

I received the last of the parts I ordered for the 5-speed overhaul on Sunday this past weekend, so three weeks total wait time. Not bad considering one of the bearings was lost in transit to Courtesy Parts and had to be ordered again. Not as fast as ordering a quest kit, but I went above and beyond what's available in those, plus it's all OEM.