Wondering if any folks knew the codes associated with the blanks for this common, not original ignition switch replacement . Keys are labeled car show with a unique identifier C23425? I noticed there are a lot of custom key blanks for the originals, but I wasn’t able to dig up if these are made for a bluebird or a 510 . ( note there is no door alarm functionality in this unit ). Any help is appreciated !

I'm no locksmith, but those look like X1 / MZ12 or DA20 / D80K.

Hard to tell without an end on shot showing the profile.

Out of curiosity... What is it you're trying to do? If you buy that lock, don't you get keys with it?

Thanks so much man your the best, I was looking to get another key made . Wasn’t in the system at the box stores and the local hardware store just needed the right blank and they said they could cut anything. Saw a custom key blank online that’s what sparked my interest. And yes you are right 3 keys is probably overkill [emoji28]


Sent from my iPhone using Tapatalk

If you already bought that lock from ZCD and have a pair of keys, then if you would take a pic of one of the keys head on, it could help in confirming the identification.

Oh good idea I should have picked up on that , this is a shot with the cut face pointing down . I believe this is what you meant .


Sent from my iPhone using Tapatalk

This may not answer your question, but I thought the info on this page was interesting with regard to Datsun keys: http://datsun1200.com/modules/mediawiki/index.php?title=Keys

 

Wow what a wealth of information thanks for sharing that love reading through that stuff , I’ve been doing as much research as I can and that sure has a lot ! I’m trying to get keys that at least look original to the untrained eye , for my doors DA23 and ignition seems to be DA20. I’m a particular person and they aren’t serious problems , so appreciate all the insight that much more .


Sent from my iPhone using Tapatalk

Yeah, I found that wiki page as well and there's a lot of good info on there.

But about your key blank and trying to use one of those titanium keys... Those TI keys are all for the double sided cut and there's no way they will fit your cylinder. Regardless which blank your lock uses, it's a single side cut and those TI blanks are for the newer double side cut.

When they describe blanks, they look at the cross section profile from the part you hold in your fingers (they call it the "bow"). And if I modify your pic and flip it around so you are looking at that profile from the bow, it looks like this:

And that still looks like an X1 / MZ12 or DA20 / D80K.to me.

Ahhh gotcha I really appreciate you taking the time to extend your knowledge, I’m always learning with this car and I really enjoy it! Really cool stuff

Glad to help, and hope you find a cool looking blank for your car!