Brake and Fuel Lines Braided Loops

[dar5052]

I am in the process of restoring my brake and fuel lines and was wondering if there is an option to replace the rubber piggyback hoses to a braided SS line. I’m mainly wondering about the connection between the actual lines. Only thing I can think of is using a AN connector but that would mean I need to braze on AN connectors on every line… anyone have another idea? 
 

The lines actually turned out very nice. I sanded them all down and coated them black, I’ll have to take a finished pic when they are installed. 

[SteveJ]

Pseudo AN fittings (hose clamps) https://www.amazon.com/gp/product/B07KLJSVKK/

AN hose to hard line adapters https://www.jegs.com/i/JEGS/555/110557/10002/-1

You can even replace the SU banjo fittings with AN banjo fittings. https://www.summitracing.com/parts/ear-at807691erl?seid=srese1&gclid=CjwKCAjw0dKXBhBPEiwA2bmObUdWw3ZXoVZg9t8sVxlQMFPw1q4Nr-rL82MjCkkosyN3yLs8j0bBNhoC-ewQAvD_BwE

 

[dar5052]

Thanks for the advice @SteveJ. I’ll look into those options.