jalexquijano Posted February 25, 2023 Author Share #97 Posted February 25, 2023 1 hour ago, Mark Maras said: Do you know if he held the throttle wide open during the tests? I just turned the key without stepping on the gas pedal. It was done just removing one plug at the time Link to comment Share on other sites More sharing options...
Barefootdan Posted February 26, 2023 Share #98 Posted February 26, 2023 Surprised the mechanic let you/showed you this method. At least this explains the low compression numbers. If you can, do the test again with all spark plugs removed and throttle wide open. You'll get better results 🙂 1 2 Link to comment Share on other sites More sharing options...
jalexquijano Posted February 26, 2023 Author Share #99 Posted February 26, 2023 1 hour ago, Barefootdan said: Surprised the mechanic let you/showed you this method. At least this explains the low compression numbers. If you can, do the test again with all spark plugs removed and throttle wide open. You'll get better results 🙂 Distributor cap pic Link to comment Share on other sites More sharing options...
dutchzcarguy Posted February 26, 2023 Share #100 Posted February 26, 2023 14 hours ago, jalexquijano said: It was a digital compression tester Hah! I think it was a BROKEN compression tester.. You normally do this in Psi? we do it in bar or ato or KPa. you need to have around 150 Psi on a healthy engine.. so look for a good compression tester.. i bought one many years ago for about 30 bucks.. a GOOD INVESTMENT!!! Take out all plugs, start for about 10 sec. (try to lay the meter so that you can see it come up..) and test them yourself. (And remember, can't do it myself.. does not excist in your vocab! ) Link to comment Share on other sites More sharing options...
dutchzcarguy Posted February 26, 2023 Share #101 Posted February 26, 2023 Also i bet you had to pay the guy more than 30 bucks.. When you would have bought the meter yourself you had one now to do many many other engines as well.. I also think, and don't get me wrong, someone who wants to drive a classic car needs to have some skill's to work at these old cars.. otherwise it's gonna cost you a LOT in a short time. (Also often garages don't understand these cars anymore. all they want is put an analizer to it.. well good luck there! 🤣 ) Link to comment Share on other sites More sharing options...
emccallum Posted February 26, 2023 Share #102 Posted February 26, 2023 You know you are in trouble when the shop asks "is it OBD1 or 2?"🤣 1 3 Link to comment Share on other sites More sharing options...
jalexquijano Posted February 26, 2023 Author Share #103 Posted February 26, 2023 Shop charged me 60 bucks jajaaj 4 Link to comment Share on other sites More sharing options...
Popular Post Patcon Posted February 26, 2023 Popular Post Share #104 Posted February 26, 2023 That's unfortunate considering the numbers are not accurate and basically useless. I agree with buying your own gauge and doing it yourself. I am sure you have the skills to accomplish this with a little instruction from us. 2 3 Link to comment Share on other sites More sharing options...
jalexquijano Posted March 1, 2023 Author Share #105 Posted March 1, 2023 On 2/26/2023 at 3:54 PM, Patcon said: That's unfortunate considering the numbers are not accurate and basically useless. I agree with buying your own gauge and doing it yourself. I am sure you have the skills to accomplish this with a little instruction from us. Is this the correct way to carry out the compression test? Im done with these mechanics here in Panama: 1 Link to comment Share on other sites More sharing options...
jalexquijano Posted March 1, 2023 Author Share #106 Posted March 1, 2023 Im actuall running BP5ES in all 6 cylinders, should i consider getting a BP4ES for cyl 4? Link to comment Share on other sites More sharing options...
Mark Maras Posted March 1, 2023 Share #107 Posted March 1, 2023 2 hours ago, jalexquijano said: Is this the correct way to carry out the compression test? Im done with these mechanics here in Panama: The only thing I can add is I remove the plugs and turn the engine over until I see oil pressure, then test. When I didn't start with oil pressure #1 would read low the first time and higher on the second test. Good luck. 2 Link to comment Share on other sites More sharing options...
Yarb Posted March 1, 2023 Share #108 Posted March 1, 2023 I think you’re on the right track doing these things your self. As my post#79 I recommend a leak down test after you get accurate compression readings. We are here to help. 3 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now