the_tool_man Posted January 21, 2023 Share #1 Posted January 21, 2023 Hi all: I made the mistake of leaving my '77 parked with the parking brake for a few months. When I released the handle, I found that the shoes were stuck. I had planned to free them by driving the car once I got it running. But I need to get them freed up before that now. I tried disconnecting the cables, which did nothing. I don't see any access to the interior to adjust or move anything. What have you tried that works? I did pick up a spare pair of aluminum drums. So if I have to cut them off, I will. But I'm hoping for a trick that gets them freed nondestructively. Thanks in advance. Link to comment Share on other sites More sharing options...
dutchzcarguy Posted January 21, 2023 Share #2 Posted January 21, 2023 7 hours ago, the_tool_man said: I don't see any access to the interior to adjust or move anything. There should be a hole (on the flat front of drum) that is (possibly) closed with a sort of lead.. through that you can alter the brake.. see service manual.. but i would hit the front from the drum with a hammer.. just light hits all over them.. maybe some heat helps too? Link to comment Share on other sites More sharing options...
siteunseen Posted January 21, 2023 Share #3 Posted January 21, 2023 That hole in the drums lets you turn the adjustment wheel on a 240. Not 100% sure if the 280s have that adjustment? but if you can't get the hole lined up to the toothed wheel then it's no good. Hit the drums with a rubber hammer or small sledge if you have replacements. My country arse would try dragging it with my lawnmower to unstick them, been there done that. 1 3 Link to comment Share on other sites More sharing options...
Zed Head Posted January 21, 2023 Share #4 Posted January 21, 2023 It's in the thing... 1 1 Link to comment Share on other sites More sharing options...
dutchzcarguy Posted January 22, 2023 Share #5 Posted January 22, 2023 It says: "Remove brake drum adjust hole plug" What beautiful english... 🤬 I would say: Remove plug out of brake drum adjust hole.. 😮 ( Because i would name the thing that's meant, first.. You guys.. tell me what is the better english? ) 1 Link to comment Share on other sites More sharing options...
siteunseen Posted January 22, 2023 Share #6 Posted January 22, 2023 (edited) They left off the "w". You should adjust whole plug not just half of it. Edited January 22, 2023 by siteunseen 1 Link to comment Share on other sites More sharing options...
dutchzcarguy Posted January 23, 2023 Share #7 Posted January 23, 2023 Yeah right! Link to comment Share on other sites More sharing options...
the_tool_man Posted January 24, 2023 Author Share #8 Posted January 24, 2023 (edited) On 1/21/2023 at 1:01 PM, siteunseen said: That hole in the drums lets you turn the adjustment wheel on a 240. Not 100% sure if the 280s have that adjustment? but if you can't get the hole lined up to the toothed wheel then it's no good. Hit the drums with a rubber hammer or small sledge if you have replacements. My country arse would try dragging it with my lawnmower to unstick them, been there done that. When I first noticed them stuck, they were only dragging. It was possible for two people to push the car. I disconnected the cables and with the help of a friend, pushed the car back and forth to try and free them. No joy. Unfortunately in the intervening time since then, they have become too stuck to push. I hired a tow truck to move the car to my new house, and he had to literally drag it out with a winch. No lawnmower I have access to is going to free them up! I'm in the process of moving, and may not get to it for a week or two. But I'll have another look at the drums to see if I can execute the process in the FSM. The key will be seeing if I can apply enough torque to rotate the drums into position. BTW, this seems like a good time to give a shout out to @Patcon, who came to my new house that cold, dark night to help me push the car into my garage. Not only were the rear wheels locked, but we couldn't get the ignition key to free the column lock (this car hates me). He was able to remove the column lock through an elaborate, technical process I've been sworn to keep secret under penalty of death. Even so, it took wheel dollies, a jack, and a tow strap using both our trucks. But we got it in! Thanks man! Edited January 24, 2023 by the_tool_man 1 1 Link to comment Share on other sites More sharing options...
SteveJ Posted January 24, 2023 Share #9 Posted January 24, 2023 If you have a flat floor, these work well to move the car around: https://www.harborfreight.com/1300-lb-capacity-self-loading-positioning-wheel-dolly-64601.html 1 Link to comment Share on other sites More sharing options...
Captain Obvious Posted January 24, 2023 Share #10 Posted January 24, 2023 3 hours ago, the_tool_man said: this seems like a good time to give a shout out to @Patcon, who came to my new house that cold, dark night to help me push the car into my garage. Nice!! Link to comment Share on other sites More sharing options...
Yarb Posted January 24, 2023 Share #11 Posted January 24, 2023 $600 on sale when you buy 4 and get the storage rack also. Dream garage candy. Link to comment Share on other sites More sharing options...
Racer X Posted January 24, 2023 Share #12 Posted January 24, 2023 On 1/22/2023 at 3:54 AM, dutchzcarguy said: It says: "Remove brake drum adjust hole plug" What beautiful english... 🤬 I would say: Remove plug out of brake drum adjust hole.. 😮 ( Because i would name the thing that's meant, first.. You guys.. tell me what is the better english? ) Its called Jinglish. 2 Link to comment Share on other sites More sharing options...
Wilbur
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now