GregD Posted March 18, 2023 Share #1 Posted March 18, 2023 I am in the process of installing the 4 speed transmission and rear engine insulator / mount on my 10/70 240, but can’t find any information on orientation of the parts. There is an arrow on the side of the insulator. Is this supposed to point to the engine bay? Also, the mount / brace has two indentations in it. Should these be to the back of transmission as it’s placed in the picture? I took tons of pictures before and during disassembly, but apparently not the pics I needed. Any help is greatly appreciated. Thx, Greg Link to comment Share on other sites More sharing options...
zKars Posted March 18, 2023 Share #2 Posted March 18, 2023 Arrow on the insolator goes forward. Good find, most don’t notice. As to the cross member, put it on which ever way fits once the trans in in the car. Is the center hole in line with two holes that mount it to the car? If so, then it doesn’t matter which way around. If the little dimples line up with the tips of the bolts on the isolator mount, all the better Link to comment Share on other sites More sharing options...
GregD Posted March 19, 2023 Author Share #3 Posted March 19, 2023 Thx for the info. The center hole does line up with the two holes that mount to the car so I’ll keep it as is. Greg Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now