Does anyone know of a source for the rubber seals on the tool storage bins behind the seats of the 240-Z...? As always, I appreciate anyone's help...Ryals

Your local upholstery shop would have it then there's always Amazon.com

https://www.amazon.com/plastic-edge-trim/s?k=plastic+edge+trim

3 hours ago, siteunseen said:

Your local upholstery shop would have it then there's always Amazon.com

https://www.amazon.com/plastic-edge-trim/s?k=plastic+edge+trim

Looks like plenty to choose from...Thanks...!

Ryal’s order three or four different sizes!! Increase your odds!! You can return the other three and pass on the info…🤣🤣

6 hours ago, Yarb said:

Ryal’s order three or four different sizes!! Increase your odds!! You can return the other three and pass on the info…🤣🤣

Will do...! My curiosity lies in how any of the many options will bend in the radiussed corners...

9 inches long, 1/2” wide, slit is for 1/32 sheet metal. Strangely the width of one side is slightly narrower than the other. Not likely going to find replacement material with that, but no one will notice.

They take a little wedge out of the center to help it conform to the corner

 

Edited August 29, 20231 yr by zKars

6 hours ago, Tirnipgreen said:

Will do...! My curiosity lies in how any of the many options will bend in the radiussed corners...

A heat gun should help with forming it around the corners.

7 hours ago, Racer X said:

A heat gun should help with forming it around the corners.

12 hours ago, zKars said:

9 inches long, 1/2” wide, slit is for 1/32 sheet metal. Strangely the width of one side is slightly narrower than the other. Not likely going to find replacement material with that, but no one will notice.

They take a little wedge out of the center to help it conform to the corner

 

So where did this come from...?

Interesting. Text and pictures from another thread I responded to.  Site bug I suspect.