240Z High/Low Beam Switch Teardown

[Terrapin Z]

Just posted on FB. 

[hotsho111]

I managed to get it all reassembled and the switch is working ok. I was playing with it a bunch and maybe every 20-30 "toggles" the switch gets a bit jammed. Normally just pressing the switch again fixes it, but one time I had to take it out, manually push it, and then it was good again.

In case anyone stumbles across this the spring I ended up choosing was "BB-31CS" (https://www.digikey.com/en/products/detail/century-spring-corp/BB-31CS/11671413) which is:

OD - 0.105" (2.67mm)
Length - 0.280" (7.11mm)
Spring rate - 0.86 lbs/in

Terrapin. I'll shoot you a message because having a backup would be good anyway

[Yarb]

Probably going to have to contact the guy on FB market Place directly.

[hotsho111]

Oh shoot I misread Terrapins post. I'll reach out to them on FB

[Terrapin Z]

Yeah Harold is the guy with the parts. hopefully he still has it. It sounded like just what you were after and a decent price too.