240Z Bell Crank

[SpeedRoo]

Looking for a throttle/accelerator bell crank for a 1970 240Z. Will be refurbished so doesn't have to be perfect.

Roo

 

[Patcon]

Is it unique to 70?

[SpeedRoo]

2 hours ago, Patcon said:

Is it unique to 70?

I believe it may have been used until mid 1972 when they changed to a version with a shorter round section.

[Terrapin Z]

Interesting,

I have 4 different ones, the other one is the short shaft.

In looking them up online, the pages all say they fit 70-78 ??

Yours looks like the top one, and that one I found listed online as for a 280Z.

The bottom one comes up as the early 70-71 style. 

I can't even find the middle one. Maybe a Roadster or something other than Z. I did not look too hard. 

[SpeedRoo]

Thanks @Terrapin Z I'll take a picture of the ones I have on 8802 and 10991 and post them. I'm looking for one to go on 3801 (May 1970). It should be like this one on 4684 (May 1970).

[Terrapin Z]

That one looks like the bottom one in my pic.(off a 71). You see the top is flat across. There is a drop on the bottom

The one in your original post was jogged upwards like the top one in my pic. 

 

[zKars]

Seems like there are 3 variations for L24 and L26

 

[SpeedRoo]

2 hours ago, Terrapin Z said:

That one looks like the bottom one in my pic.(off a 71). You see the top is flat across. There is a drop on the bottom

The one in your original post was jogged upwards like the top one in my pic. 

 

I believe you are correct, that's the one I need if anyone has a spare they would like to sell.

Roo

[gundee]

1 hour ago, zKars said:

Seems like there are 3 variations for L24 and L26

 

There really is just 2. The first 2 are the same. Second one supersedes the first one.

[SpeedRoo]

Now I know what to look for I'll keep an eye out on EBay and CraigsList. Thanks for everyone's help.

Roo

[SteveJ]

1 hour ago, gundee said:

There really is just 2. The first 2 are the same. Second one supersedes the first one.

And to clarify further, there is one for the round top. The last part number is for the flat tops.

I'll look to see what are on my 73 & 74 if I can remember by the time I get home.

[Yarb]

The one for the 280z looks like it as well. N3300