Jump to content
Email-only Log-Ins Coming in December ×

IGNORED

My 1970


Recommended Posts

I always find it interesting to see the cars that belong to our club members. So, I thought I would share a pic or two of mine. I picked up this car (HLS30-05341, blt 6/70) about 3 1/2 years ago. It had 69K on it, about 74K now. I redid the whole interior, which is the rare blue color. This past year I restored the engine compartment, complete with all new seals, timing chain, paint, new Z Therapy carbs, new decals and as much new parts as I could get my hands on. It has Panasports, Yokahama 215/60/15's and Tokico struts. Next I hope to redo the entire suspension with stock parts.

This is the second 240Z that I have restored, and have loved every minute of it!

The first pic is at the Indy Z Car show, where it took

Marty

post-874-14150791868209_thumb.jpg

Link to comment
Share on other sites

Finally someone shows an engine! Great job!!By chance does your valve cover read "nissan 2400 ohc"?If so, very rare.I have a 73/72carbs etc.I hope to have photos online very soon.I also believe if you can 't paint it,rub it till it shines!LOL daniel

Link to comment
Share on other sites

Great paint job!! Is that an original Z color? If so which paint code? I don't remember seeing an original look that good. Or did you have it done in basecoat/clearcoat?

I'm not sure but I think the 2400 valve cover came on all the Series 1 cars, a friend of mine has one he bought brand new (no he won't sell, I've been trying for years) that has one. His car was built in 11/70 and the one I bought was built in 11/70. Mine doesn't have the original head but luckily I have a couple E-31's and one has the 2400 valve cover. It's kind of strange that he bought a Z over 30 years ago and I finally found a Series 1 three years ago and they were both built the same month, in fact the Vin numbers are pretty close. His is 14749 and mine is 15721.

Mine was originally 915 orange but I am going to change it to 110 Red. I know I should put it back original but I've always wanted one in red, finding one seems to be almost impossible.

Link to comment
Share on other sites

No the original did not look that good! The original color was Dark Blue metalic 903. It was not that nice. The PO painted the exterior before I got it. As I was told, it is Ford, Midnight Blue, 2 basecoats, with 3 coats of clear. I like it way better than the original color.

About yours, you should be fine switching from one original color to another, as long as you do a thorough job of changing it everywhere. That is if you are going the originality route. I had a '73 before, that I mildly customized. It was originally that pukey lime yellow, which I coudn't stand. I repainted it Guards Red (Porche), with Golld pearl in the clear coat. That car was drop dead beautiful!!! So, If you like red, go for it!! Just be prepared to be noticed by the cops too.

Link to comment
Share on other sites

No matter who's color it is it looks good on a Z, especially with the Panasports!

Right now I have mine stripped, I'm doing the underside and engine compartment first. I already rebuilt and repainted the suspension etc. I plan on putting the running gear back in before I do the outside of the body, then do the interior last. As far as the cops go, I don't plan on driving this one too much. Only on sunny summer days and maybe a couple shows. I have an ITS car that was wrecked so if I get that fixed I can get my need for speed taken care of on the track. I raced a 280 I built years ago but it just wasn't fast enough so I've got that one sold.

There is a nice looking 280 on ebay right now, item #600493059, it isn't original but it sure does have a great color. It seems like every Z I've ever owned was orange at one time or another, I've never liked orange so after seeing two 240's in the old Z-car magazine I decided on the red.

Link to comment
Share on other sites

Marty,

Love the colour, love the car. She really looks great! :)

Engine bay looks the business too. Thats something on my to do list.

We call your wheels Minilites over here, well they closely match them. Definately suit the Z.

Link to comment
Share on other sites

I do have one question. How did you clean up the vaccuum canisters on the intake?? I haven't seen too many that shine like that. Did you buff them or re-plate them??

I hope to be able to figure out how to use the buffer I bought from Eastwoods so I can polish my intake etc. and hate to think about putting those grungy little buggers of mine back on without trying to clean them up like yours.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Privacy Policy and Guidelines. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.