wtb-wheels/performance parts 240z

[drmattyg]

I want to trade some of my stuff, for some of your stuff. I only want stuff that's is good working condition. I'll sell or trade any of my stuff.

wanted:

-a nice looking set of wheels, 14-16 inch with tires to match. I really like wheels that are blacked out in the center, but i'm open to ANYTHING.

-exhaust 2.5 inch piping + header

-3.7 lsd

-triple carbs setup

-eibach, tokico, or ST springs

-tokico or bilstein struts

-LATE 5 SPEED TRANNY!!

for sale/trade:

-refurbished datsun seats

-rear MSA sway bar

-complete l28 engine

-early su's with polished tops.

-3.36 r180 rear end

i'm in the sf bay area in california. email me at

drmattyg@yahoo.com

[drmattyg]

i'll even buy some of the parts I need...if the price is reasonable.

[Gav240z]

What did you want for the Early SU's and are you willing to ship?

[drmattyg]

the early su's are nice, although the front carb had fuel shooting out the vent hose on top(bad needle valve I think) This has only happened once, but I swapped them out anyway just to be on the safe side because my buddy had an extra set laying around. The carbs ran great before I took them off except for that one incedent. Might be wise to just rebuild them. I guess I'd ask 75 bucks plus shipping although shipping to Australia seems expensive and I'd be more comfortable if you were to look at them before buying them.

[christ0ph]

How much are you looking for the l28 engine? Is it carbed or fi?

[drmattyg]

the l28 is FI, and has some of the fi stuff still on it. The engine is complete, the FI stuff is bonus. I was asking 100? I don't know what's fair though.

[christ0ph]

This seems a little bit like a newb question, but does anybody know if FI engines can be retrofitted with carbs?

[drmattyg]

of course they can! Under the hood of my 240z is an l28 with early su's. Stay away from the 73 and 74 carbs though...

for picts, check out www.cardomain.com/id/drmattyg

[christ0ph]

To retrofit them, would I just need a manifold from an earlier l28? The idea intrigues me...if you're selling for 100 dollars i think i might just be interested...where are you located?

[drmattyg]

i'm in moraga, which is right near oakland and walnut creek. To retrofit, you need to get a manifold from a 240 or 260, and pop it on there. You also need a few other things such as a fuel rail and the linkage, but you can get that stuff for dirt cheap at a junk yard.

[christ0ph]

Hm you're quite awhile from me. As it says, I'm in socal, orange county.

[drmattyg]

haha alright, let me know what you want to do.