z_boi Posted July 23, 2003 Share #1 Posted July 23, 2003 Is the offset of rims measured from the mounting surface for front and back? Link to comment Share on other sites More sharing options...
z_boi Posted July 23, 2003 Author Share #2 Posted July 23, 2003 wondering if 17x8 with zero off set will fit under stock fenders Link to comment Share on other sites More sharing options...
GTZZZ Posted July 23, 2003 Share #3 Posted July 23, 2003 Measurements And Another And Another Backspacing Link to comment Share on other sites More sharing options...
Dreco Posted July 23, 2003 Share #4 Posted July 23, 2003 I'm running 17X8 with 17/45/235 in the rear and 17X7 with 17/45/225 in the front and it JUST fits. I did have to bend the inside lip, of the top of the fender, up a little. when I hit a real hard bump, it would rub a little. I do have a lowered suspension. the back spacing on the rear rim is 5 inches, the front is 4inches. If you have more than that they won't fit with stock struts, don't get a tire wider than the rim. it's close. Just as a precaution, I grinded away a very small portion of the perch, holding the spring in, just to give me another 1/4 inch of clearance( did'nt look like it took any strength away from the perch. I guess a coil over suspension gives you a little more clearance. Link to comment Share on other sites More sharing options...
z_boi Posted July 23, 2003 Author Share #5 Posted July 23, 2003 your not running coilovers right? Link to comment Share on other sites More sharing options...
z_boi Posted July 23, 2003 Author Share #6 Posted July 23, 2003 never mind that last question Link to comment Share on other sites More sharing options...
Wilbur
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now