Jump to content
Email-only Log-Ins Coming in December ×

IGNORED

R200 LSd Q's


Recommended Posts

Not an expert on the lsd, but if youy shimmed it out too much it would cause more than normal wear and tear on the diffy. I think the factory break-away torque is set to 42 ft lbs.

As far as the 260 axel shafts, do you have the r-180 or r-200 rearend?

Link to comment
Share on other sites

interested to hear anyone who has done this conversion re latter r 200 diff into 240 or 260 cars hear all different stories about ok if you use r200 diff output shafts to earlier axles and some that you can modify cv axles to suit

anyone done this please tell

Mick

Link to comment
Share on other sites

I had the clutches in my Skyline's R200 replaced (the tolerances are very fine) & it's been shimmed up to 90ft/lbs breakaway. Any more than that (another 3 thousandths) and it was locked.

(this diff was completely open when I got the car)

My Z diff is set at 65ft/lbs with the original clutches just reversed.

Get someone who knows clutch-type LSD's to build it for you.

The OEM setting of ~45ft/lbs is too loose for a high-power performance application.

Link to comment
Share on other sites

Since we have been referring to clutch plates (rather than a viscous centre), it's all too easy.

If your 260Z is already equipped with an R200, then all you will have to do is change over the tailshaft flange & bolt it in (the flange controls pinion-height so it has to be torqued correctly).

If you have an R180 equipped 260Z, then you wil need all the mounting gear from a car that already has an R200.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   1 Member, 0 Anonymous, 157 Guests (See full list)

×
×
  • Create New...

Important Information

By using this site, you agree to our Privacy Policy and Guidelines. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.