After carefully looking at my tank after getting it from Moyers I noticed that there were no openings in the baffle to allow fuel to level from one side of the baffle to the other. I called Moyers and they were not very helpfull. At best they said if I shipped it back they would look at it. I used a dremil tool an a long piece of wood and was able to open a slot between the baffle and the tank about one inch long and about 1/32 wide . Is there any one out there that can tell me how large should the openings be and where they are located. I am sorry I didn't look at the tank that carefully before I sent it out. Apparentlly the lining material they used sealed off any openings.

Al

I just put mine back in or I'd go look..... but if I remember right there was only a small gap separating the baffle from the tank on the ends. I don't remember seeing any openings along the bottom of the baffle.