260Zed Posted September 4, 2003 Share #13 Posted September 4, 2003 Gav240z - 79-83 Hilux 4x4, just make sure there s-12's to keep your solid disc.Currently saving pennies for this, does anyone else have any other combinations for up front? That wont cost the earth...Luke Link to comment Share on other sites More sharing options...
260Zed Posted September 4, 2003 Share #14 Posted September 4, 2003 oops sorry, i really should have re-read your post, Link to comment Share on other sites More sharing options...
texasz Posted September 4, 2003 Share #15 Posted September 4, 2003 Originally posted by ZmeFly this is for use with the stock rotor, complete remanufactured sets of calipers, brakes and pin and spring kit are included. When where these remanufactured? How much use have they had since then? Sounds like all that's missing are the pads to start using them. Is this correct? Link to comment Share on other sites More sharing options...
ZmeFly Posted September 4, 2003 Author Share #16 Posted September 4, 2003 for the price i quoted these are ready to bolt on, all you have to do is bleed the brakeswhat im selling comes with everything you need! all you do is the work to put them on:ermm: the calipers are not used but new remanufactured units.all you have to do is bolt them to your car, bleed them out and voila you are done. Link to comment Share on other sites More sharing options...
Gav240z Posted September 5, 2003 Share #17 Posted September 5, 2003 Zmefly are you selling these as a business deal or just 1 pair? If you plan on selling them for a while, I spose I'd be willing to look into them in future . Link to comment Share on other sites More sharing options...
ZmeFly Posted September 5, 2003 Author Share #18 Posted September 5, 2003 i can get as many as needed. so if you will want them later down the road ill have them:classic: Link to comment Share on other sites More sharing options...
Arizona240z Posted September 5, 2003 Share #19 Posted September 5, 2003 I guess I better start posting like crazy to get to the $1000 mark... As far as the prices go I think "Zmecruise" has a batter price than than the auto stores! I haven't checked though, just going off what other people have told me. :classic: Link to comment Share on other sites More sharing options...
ZmeFly Posted September 5, 2003 Author Share #20 Posted September 5, 2003 no discount for you!! Link to comment Share on other sites More sharing options...
mmagnus Posted September 5, 2003 Share #21 Posted September 5, 2003 I tried bolting up a pair of Toyota 4x4 calipers to my stock rotors and found there wasnt enough clearance. I would of had to cut back the backing plate to mount them. Do you find the same.mark Link to comment Share on other sites More sharing options...
ZmeFly Posted September 5, 2003 Author Share #22 Posted September 5, 2003 yes you would have to either cut the backing plate for the calipers to fit and or remove it completlythanks for that reminder Link to comment Share on other sites More sharing options...
mmagnus Posted September 5, 2003 Share #23 Posted September 5, 2003 I didnt think about removing the plate. Is that ok to do. Link to comment Share on other sites More sharing options...
2ManyZs Posted September 5, 2003 Share #24 Posted September 5, 2003 It's OK to remove it, but, the worst part is you'll have to pull the hub to do it... Probably easier to just get a good set of tin snips and trim it a little to fit the caliper.....or a Dremel tool and then just file it (or sand it with the Dremel) off where you cut it just so you don't snag your hand on it later.... Link to comment Share on other sites More sharing options...
Jeff Berk
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now