Looking for the J (apan) county plate

[Z-point]

Hi all,

In completing my replica works rally car I am looking for a nationality plate from Japan.

A metal one would be nice I will attach a picture so you all know what I mean.

[Z-point]

here is a better one!

[HS30-H]

Hi Guus,

Your best bet is to make a replica yourself.

The originals are VERY rare even in Japan ( not many Japanese-registered cars were fitted with them for 'temporary use' outside Japan, in conjunction with the 'temporary export' translated Japanese registration number plates ) - so I think you will be very lucky to find one.

Making a replica should not be too difficult. The originals were just aluminium plates with a white reflective face ( you know - the type that looks white until you shine a light at it, and then it becomes reflective ). On top of that, they screen-printed the black border and "J" letter. You could do it with computer-cut vinyl lettering.

They just pop-rivetted them to the rear hatch ( using steel pop-rivets, not aluminium! ). Its just a flat piece of metal - no moulding / forming at all.

Here's a pic for better reference:

Alan T.

[HS30-H]

Here's another angle:

[HS30-H]

whoops

[HS30-H]

This one did not want to attach for some reason, sorry. Got it now:

[Z-point]

This is great Alan! I always though the plates were stamped out but this is easy to replicate.

I had my thoughts about the plate because if you drive on an island (Japan) you do not need one so therefore they must be hard to get.

Some ‘work-san’ got the order “make a country plate for our cars abroad” and so hi did with what was at hand.

[HS30-H]

Go for it Guus,

I'm sure you can make a really accurate replica. You should be able to gauge the size and shape from referencing your pics and mine.

The aluminium plate is quite thick ( maybe 1.5mm? ) and not as thin and easy to bend as you might think. I'm sure you can buy sheets of the silvery-white reflective background to stick on it, and the black border and letter are probably easy to get computer-cut and carefully stuck on.

Bury it at the bottom of your garden for a few months and then dig it up. A quick wipe, and it'll look just like the real thing!:classic:

Alan T.

[wire cloth]

Here you go!

http://www.licenseplates.tv/default.php?cPath=21_139

Jon

[wire cloth]

Don't forget to get the Japan License Plate too!

http://www.licenseplates.tv/default.php?cPath=3

[Z-point]

Thanks Jon,

If Alan did not send the pictures of the real stuff, I probably bought the J plate. Now I can see the difference and I like to go for almost original. ‘Yours’ is missing a small horizontal line on top. It is a little weird how I work because a lot of people certainly do not know how the works car was equipped or looked like.:stupid:

[wire cloth]

Guus,

It is a shame they can't get it right. They probably use the same font for all of them. As they say, close but no cigar. Thank you for pointing it out.

Jon