Plastic wheel center cap

[woodzcar]

I developed a crack in one of my wheel center caps a couple of years ago and it needs refinishing again. Any suggestions on how to refinish the plastic face?

[DatsunZGuy]

Hmmm...it looks like this would be its second repair.

What kind of wheel is it from? You might be able to trackdown a replacement.

If you can't find a replacement, I would clean out what's in there now and apply some good epoxy putty, sand and repaint it.

-OR-

If you're good with sheetmetal, cut a rould piece out that would fit the inner diameter on the silver circle. Then, bond it to the plastic cap with some JB Weld, and paint.

[woodzcar]

Thanks for the suggestion- I'll try that. Here is a photo of the wheel - It's a 15x7 Keystone Dyna Lite in a 3 piece design. Can't find them anywhere much less the centre cap!