4 point msa street rollbar - $100

[auxilary]

this has been sold

more pics here:

http://www.datsunracing.com/forsale/rollbar/

i bought an autopower unit, so i have no need for this. it's used, off an auto-x parts car, no mounting hardware (no bolts, no plates to mount it in the wheel wells, but $10-15 in parts at a hardware store should be enough to get you going).

the bar ties into the strut towers, bolts to the 2 out of the 3 bolts holding the strut isolator in on each side. The other tie in points are wheel wells like the autopower rollbar. I'll get pics later, local pickup (bay area, california) only please, it'll cost about 50 bucks to ship freight, and it's not worth it for the bar and trouble. There's very light surface rust on the few spots where paint rubbed through, but sandpaper and krylon will do a quick fix.

[mandtw]

If you still have the rollbar please give me a call. Day # 661-276-2116 (NASA Dryden- Edwards AFB Area). I make frequent trips to Bay area.

[auxilary]

as of right now it's spoken for. if the buyer flakes, i;ll let you know

[mandtw]

Thanks for keeping me in mind. - Tom:classic:

[auxilary]

check your PM

[mandtw]

I am still interested please give me a call @661-276-2116 for payment details.