SoCalZ Posted February 2, 2002 Share #1 Posted February 2, 2002 73' 240Z, What is the torque for Diff Cover? Can't find it in the FSM or in Chilton's. Thanks in advance. Link to comment Share on other sites More sharing options...
Royce Posted February 2, 2002 Share #2 Posted February 2, 2002 Sorry, no manuals close at hand! The Chilton's manual should have a general information page on torque settings where you can look up the lenght and size of the bolt and determine the proper torque. I personally would probably be okay with tighten them w/o a torque wrench, although if you can find the setting it wouldn't be a bad idea either. The key is that they are all tightened evenly, most people tend to over do this stuff. The definition of maximum torque: Tighten it until it strips and then back it off 1/4 turn. Have fun! Link to comment Share on other sites More sharing options...
2ManyZs Posted February 2, 2002 Share #3 Posted February 2, 2002 According to my 71 shop manual, it is 14-19 ft-lbs. Which isn't much, if you don't have a torque wrench that goes that low, just use a 3/8 wratchet until it's snug. For such a thin book, I'm surprised it was even listed. Link to comment Share on other sites More sharing options...
SoCalZ Posted February 3, 2002 Author Share #4 Posted February 3, 2002 Thanks all. Got it and I hope it doesn't leak. Link to comment Share on other sites More sharing options...
2ManyZs Posted February 3, 2002 Share #5 Posted February 3, 2002 If it leaks, well, you'll just have to do it again. I usually just use blue RTV silicone to help seal it up, don't use too much as you don't want any pieces of that floating around in there, just put some on your finger and give it a light coating, it shouldn't leak. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now