Jump to content
Email-only Log-Ins Coming in December ×

IGNORED

dumb gasket question


frankensteinZ

Recommended Posts

Sealer is not required but I've noticed that some shops put some of that copper high-temp sealer on the gasket. If you are using headers then a sealer might help maintain the seal. I don't know about you guys but those "special" gaskets from MSA for headers seem to develop cracks. I think we have discussed this one before.

Link to comment
Share on other sites

The Factory Manual states no sealer is necessary.

Although, in actual practice I would recommend using high temp sealer on the exhaust.

The exhaust manifold is prone to developing a "slight"warp and sealer is cheap insurance against that posssible and very annoying exhaust leak that hampers the z series. [sometimes]!

Link to comment
Share on other sites

No gasket gew is neccessary however i would recommend fastening all bolts first and then tightening in a cross pattern to ensure a good seal.

To check for exhaust leak use a cut off garden hose and put near seal and check for flutter noise.

I know the exhaust shop who cut a section at the extractors so that I could remove the exhaust and get to the gbox easier didn't do a great deal with sealing and possibly used gasket gew and it's still leaking I didn't take it back yet car hsan't been on the road but i'm pissed off with them because it's something so simple and they can't get it right.

The old do it yourself if you want it done properly often applies :stupid: .

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Privacy Policy and Guidelines. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.