hey there,

my email seems to be down, so if you replied, i am not ignoring it, just can't get it. I do want the parts.

thx mark

Got the parts! Great deal!

Thanks

I am looking for a set of stock seats that I can recover and install in my 78 280. What shape are yours in? Thanks, Tom Barnett

Still waiting for my shipping quote.....Try this, man, works great: http://wwwapps.ups.com/QCCWebApp/request?loc=en_US . Last couple heads I shipped were 8X12X30 or 8X8X30 or 12X12X30(depending on box) and about 40 lbs.

I believe I sent you my business address also. UPS goes down nicely with that.

steve77

Originally posted by SHOTIME

Here's what's left-

Blower motor- 2 $5

Steering column- 3 $5

Engine block, 2400- 3 $25

Rods and Pistons std.-3 $25

Gas vent tank- 3 $10

Spare tire hold down- 3 $5

Pedel assembly gas and brake- 3 $10

Dash (with harness, gauges, radio)- 3 $275 (small repairable crack)

Steering wheel- 3 $15

int. panel (where dome light is)- 3 $5

1/4 glass- 3 $20 both

steering wheel cover- 3 $5

seats- 2 $20 both

Doors*- ? $5 each (no rust showing)

4spd tranny- 2 $20

heater core- 2 $5

tail lights -3 $25 both

wipers- 3 $5 both

side markers -1 $1 each (lenses good)

hood hinge -3 $5

hood access panels -3 $10 each

metal tail light panel-3 $15

interior switch(on side of dash) -3

crank- 3 $5

cam- 3 $5

cam oiler -3 $5

E31 head- 3 $50

valves-3 $10

intake-3 $5

complete black vinyl int. -2 $10

windshield-3 $30

Brake booster is not in the best condition so I don't want to sell it. Like you said, brakes are important.

I need to be emailed for parts requests. kellyb@rochester.rr.com

I sent you a PM

Too bad the body is shot.. know what thats like!

If anyone knows where I can get a good 240 chassis, be sure to e-mail this way!

Thanks, hope the selling goes well,

Phil

(PLPalinkas@Earthlink.Net)

I would take the interior vinyl black pieces if they are available still. Please let me know what all is left.

Thanks!

Do you have the radio for sale? Specifically, I am in need of the radio knobs. Some idiot stole mine! Thank you.

SHOTIME,

I sent you an email about the part I received but have not heard back from you.

I got the wrong part. The valve cover I received was the "Nissan OHC" one and not the "Nissan 2400 OHC" that I bought from you. Please get back to me so that we can resolve this error and I can get the part I purchased.

Thank you

I am looking for a flywheel, rear engine plate and clutch line from the master to the flex hose for a 5 speed conversion. Do you have any of those parts?

Shotime,

Are you in Rochester NY?

STILL waiting to hear from you about the mix up with the part you sent me. PLEASE contact me so that we can get this straightened out ASAP.