I know this is probably a long shot, but I am looking for a used front spoiler for my '71. I am not picky, but would prefer a urathane one, not the fiberglass. I don't think I could get the car in the driveway if I put on a fiberglass one.

What's the difference? You will bend the sheet metal valance just as easily with either spoiler material. Don't think a urethane spoiler will flex and save the bodywork when a fiberglass one won't. Spoilers mean low ground clearance and you must be very careful with your driving. Easiest way to bend up a front end is to put a spoiler on in my opinion.

I think the fiberglass one will crack long before the urathane one will hurt anything in the front end. Also, the urathane one will flex better when putting the car on the trailer.

You could try one of those "spook" spoilers. They are smaller and are not as low to the ground.

Can get you one write me at zcarmann@yahoo.com

I have used the urethane type since 1982 on my first 240 Z car and have had one on each of the next ( 6 ) I have owned and have never had any front damaged caused by the spoiler, I guess some of us can drive and the rest look out the windows . :stupid: