FS: Autopower Roll bar

[SCCA_racer]

Used, good condition Autopwer 4 point NHRA, SCCA legal roll bar. This can be used as the rear half of a full legal cage by adding the Autopower "u-weld-it" kit.

Bolts in and includes backing plates. Requires drilling holes but no fabrication needed. Hardware included.

I am just trying to offset the cost of going to a custom cage on my new car. This would be a very nice safety item in a high power street car (especially a wild V8 swap that needs a bar for drag racing).

I will get some pics of it out of the car and post them in my gallery as time allows. Please feel free to reply or e-mail with questions.

I am asking $300 but would entertain other offers, especially if I don't have to ship it. (it is hefty)

Pic attached is of it installed in my old race car.

You can see that it has an added crossbrace for seat back braces and to stiffen the chassis. It could be removed for street use.

[fightyourself]

where are you located? will this fit on any model of the z or just limited to 240-280z? thanks

[SCCA_racer]

I am in Austin Tx and could deliver it within a reasonable distance (Dallas, San Antonio, Houston, Corpus Christi)

I Know that it fits the 70-78's. I could guess that it might fit the ZX as well since it shares a listing with that car in the catalog, but beyond that I would guess that it is a matter of luck.

It does not share a PN with any of the other yeasr of Z's so I would not try it.

[SCCA_racer]

Here are a couple of pics out of the car.

I have reconsidered my asking price to make this more attractive.

$200 you pick it up. $225 plus shipping(extra $ is tocover expense of lashing it to a pallet or whatever to ship it)

Email or post with any questions.

Bryan

[SCCA_racer]

Here is the other view out of the car.

[earlycanz]

Hi

Interested in it at the pallet price. Could you give me approximate dimensions/weightoriginating ZIP so I can check shipping prices. Sorry if this is repeat info.

[SCCA_racer]

I will try to get the measurements but I am not sure where to weigh it. I may be able to find the weight on a dealer webpage.

I will post it here when I get it.

thanks

Bryan

[earlycanz]

Thanks, you may be able to ship it simply by wrapping it with heavy tape to protect it. I will look into that if you can give me its' footprint and height, approximate weight. Can't imagine it being much more than 50 to 60 pounds which is what one in my other car is.

[SCCA_racer]

weight is 53 lbs

dimensions are 52x23x12

Looks like UPS to the greater extents of the US is about $50 (not including any packing materials)

[earlycanz]

can you leave your email so I can contact you directly...I am interested in this rollbar

[earlycanz]

Are you still checking on this or have you sold it?

[clutchdust]

2nd in line.