Clutch Suppliers in Australia

[Gav240z]

I need a new clutch my current one is slipping where can I get one from in Australia that will support 250HP in a 72 240z?

I rang one Z specialist here and he wasn't so helpfull so just wondering what I can do?

[260DET]

If you were in Brisvegas I'd suggest Albion Clutch Service who do a lot of competition stuff. But seeing you are not I won't.

[Ben]

http://www.adelaideclutch.com.au

Don't mind the webby, they focus their energies on clutches.....

[nixcars]

Hey Gav,

Are you interested in a lightened flywheel (about 6.8 kg from memory) it's been balanced together with a R31 pressure plate (more clamping force) & has a R31 clutch plate which is 240mm in diameter as opposed to 225mm standard. This give you more pad area. I have the whole set up with new clutch plate & new bearing for $395.

Nick.

[Gav240z]

What's involved in getting it into a 240z?

I wasn't looking at that much for the set up originally but spoke to a mate who was telling me of a very similar set up could be the same deal.

Let me know.:classic:

Another words I am interested if it's a low fabrication job or no fabrication job.

[nixcars]

As per normal Gav, everything is the same as far as spline, flywheel bolt pattern etc goes.

Nick.

[viparz]

Hey Gav, I am about to get a clutch put in my 240Z that will handle 300 horsepower. Message me if you still need one

[Gav240z]

Ahh Hello new member thanks for the offer but i took care of the clutch 2months or so ago.

I ended up going with A PBR RPM clutch with hardened teeth and heavy duty clutch plate. I also installed a lighter flywheel and have been fairly happy with the current set up.

Once again thanks.