February 9, 200421 yr Author comment_67762 may I ask where I can get those sockets? cos I had a quick look at supercheap they dont sell these stuff... Link to comment https://www.classiczcars.com/forums/topic/9602-parts-swapping-240k-sedan-to-coupe/?&page=3#findComment-67762 Share on other sites More sharing options...
February 9, 200421 yr Author comment_67763 hows the flares goin' btw? Link to comment https://www.classiczcars.com/forums/topic/9602-parts-swapping-240k-sedan-to-coupe/?&page=3#findComment-67763 Share on other sites More sharing options...
February 9, 200421 yr comment_67764 Just about to post in the Parts section, stand by :classic:Sorry I meant in the other section Body and Paintwoirk!!! Link to comment https://www.classiczcars.com/forums/topic/9602-parts-swapping-240k-sedan-to-coupe/?&page=3#findComment-67764 Share on other sites More sharing options...
February 9, 200421 yr comment_67798 On Parkers, and headlights, you'll have 4 red circles light up at the back with the GT-R lights. When you brake, the inner lights become more intense. Link to comment https://www.classiczcars.com/forums/topic/9602-parts-swapping-240k-sedan-to-coupe/?&page=3#findComment-67798 Share on other sites More sharing options...
February 10, 200421 yr comment_67802 Go down to your local wreckers, check out some R31 Skylines (4 round tail light models); they work with tail/brake system.From memory these aren't too different from the K sockets, so you should be OK. If not you can always use a file to make it fit!James:classic: Link to comment https://www.classiczcars.com/forums/topic/9602-parts-swapping-240k-sedan-to-coupe/?&page=3#findComment-67802 Share on other sites More sharing options...
February 10, 200421 yr Author comment_67810 so I dont really have to change the socket if I have the GTR lights.... but I would prefer the outer red to be more intense like the inner one when you apply the brake...might replace that side then... Link to comment https://www.classiczcars.com/forums/topic/9602-parts-swapping-240k-sedan-to-coupe/?&page=3#findComment-67810 Share on other sites More sharing options...
February 10, 200421 yr comment_67815 There is an anomoly... both pairs of GT-R lights I have are the same, and from various pictures they seem to be correct in operation... HOWEVER! the outer light bulbs are a dual filament bulb also (and socket). But the second filament doesn't get used.Whatever the case, this means that with a bit of altered wiring you should be able to get the outer lights to intensify when braking also, without changing the sockets.I think... Link to comment https://www.classiczcars.com/forums/topic/9602-parts-swapping-240k-sedan-to-coupe/?&page=3#findComment-67815 Share on other sites More sharing options...
February 10, 200421 yr Author comment_67818 have you tested them? change the bulb maybe the send one is filament is not working? if not then somethings wrong with the wiring Link to comment https://www.classiczcars.com/forums/topic/9602-parts-swapping-240k-sedan-to-coupe/?&page=3#findComment-67818 Share on other sites More sharing options...
February 10, 200421 yr Author comment_67819 do I get a discount for that then Lachlan? faulty lights... hehehe :classic: Link to comment https://www.classiczcars.com/forums/topic/9602-parts-swapping-240k-sedan-to-coupe/?&page=3#findComment-67819 Share on other sites More sharing options...
February 10, 200421 yr comment_67842 Like I said, both lights are like this, and from pictures it seems that that's how they're meant to be. I replaced a few bulbs that were dead / dull and tried swapping them all about. But this is how they are. Attached is a picture of a sedan... not a GT-R but I think they'd be the same. I also recall seeing on the front cover of a magazine a GT-R with only the inner lights on. This doesn't seem to answer the mystery about the dual filament bulbs on the outside, though. For what its worth... at least some R33's have only the outer lights for braking, as well as at least some R34's. And I saw a Turbo R30 just the other day with the inner lights lighting up only. All a bit fishy though, I've emailed a couple of webmasters from Japanese sites - maybe they will be able to help. Link to comment https://www.classiczcars.com/forums/topic/9602-parts-swapping-240k-sedan-to-coupe/?&page=3#findComment-67842 Share on other sites More sharing options...
February 10, 200421 yr comment_67843 Here is another picture, this time of a Hardtop... Link to comment https://www.classiczcars.com/forums/topic/9602-parts-swapping-240k-sedan-to-coupe/?&page=3#findComment-67843 Share on other sites More sharing options...
February 10, 200421 yr comment_67905 Lachlan,Could be that a dual filament globe was put into the outers just by accident or was the only globe on hand for a quick replacement. If the outer sockets are "two wired" only then I'd say this is the case.By the looks of the pics it suggests that the inner lamps are brake and tail combination, with the outer tail only.One other question I have for you; what offset is recommended for the C110 GTR, rear in particular...Thanks Link to comment https://www.classiczcars.com/forums/topic/9602-parts-swapping-240k-sedan-to-coupe/?&page=3#findComment-67905 Share on other sites More sharing options...
Create an account or sign in to comment