biddljj

Man.... Your are a real resource. Were you a engine rebuilder ? Jay

I am pretty sure my truck says grrrr and spits on the ground when I plowing too much snow.....

http://www.pertronix.com/ignition_products/ignitor.htm

If you go the restoration route make sure both supply lines still work when you get it back. I "assumed" my tank was correct.... drove me nuts.. deinstalled tank again only to find the gas supply line was sealed closed inside the tank. Aircraft paint remover carefully applied fixed my tank.

Do you own: Compressor Floor Jack Jack Stands Metric and American socket sets Welder

What do the plugs look like ? Are the front cylinders black ? zdisease

My very mangled valence off the 240z is original... It has a lip that is about and inche deep.

I need a Center Valence for my 1972 240Z as well.

http://forums.hybridz.org/showthread.php?t=112686 Good advice on frame rail welding Jay

Too much light can be a bad thing too. My Replay Sirius receiver is ok in the day but way distracting at night. Jay AKA zdisease

I am interested in the headlight cowls if they are metal. Jay

How about a 5 Speed Transmission for my 72 240 (82 Z maybe) ?

I emailed the body shop that's working on my 72 240Z today. I was wondering if April 2007 was too optomistic for completion (one year). To my delight I got back a reply.... "We are working on it right now, expected completion in January"

I didn't want to drop the tank in my 240..... When I finally got around to it it was easier than I thought...

Sounds like me in the 71 GTX..440 back in the day.

Based on too much experience my inspection would have the following steps: 1. Rear wheel arches 2. Rocker panel under the Door - dog leg near rear wheel to base of front fender 3. Bottom of doors 4. Floor pan where you feet go + behind seat 5. under car... floor pan + frame rail 6. Battery pan 7. Inside the front wheel wells along the frame rail 8. Rear hatch Jay

Did this problem exist before the ditributor was replaced ?

I am restoring a 1972 240Z. What is the best advice on Seat upgrades ? I am looking for sport seats that are confortable for long hauls. 3 point harness is the plan. Thanks, Jay :bandit:

The "Real" question: Is it possible to own a 240Z and not wrench on it ? signed... Too much time in the garage

That Z is a clone of my Orange 1972 240Z. I bet the floors, rockers, rear qtr, front fenders + wheel wells all have rust damage. With any luck my 240Z will be navy blue in the next couple of weeks. The EBay 240 seems to be too expensive. Good Luck

I Drive a 2002 WRX that my 240Z wants to live up to. 1998 Dodge 2500 V10 4x4 2004 Subie Forester - Just as strong as the WRX but handle worse Jay :stupid:

I don't know what "PM Me" means. Thanks, Jay

Does anyone have a source for a replacement inner rocker panel for the driver side on a 1972 240Z ? Thanks, Jay Nederland Colorado:smoke:

I am restoring a 1972 240Z. At this point I am looking for a driver side inner rocker panel. Does anybody have a source for inner rocker panel replacement ? Jay Biddle Nederland Colorado