Noddle

http://cgi.ebay.com.au/DATSUN-240K-COUPE-GT-/370472430417?pt=AU_Cars&hash=item5641e0ab51 it's the same one as above.

Hi, FYI for anyone having tacho issues. I finished moving my turbo setup from my '77 four door to my '73 two door a week ago, but I been having issue getting my tacho working again, I spent some time checking some wiring diagrams, and noticed there were differences between the too, one has 3 wires, power, earth, - side of the coil, (late) the other, 4 wires, power, earth, and a loop wire (loop picks up inductive energy from the power to the coil I believe) (early) swapped the tacho over, working fine now. Nigel

Depends on what year, my '73 & '77 have different washer bottles (and location) and the motors fit differently into the bottle. for my '73 I brought a generic motor which had the same size pipe for the in / out Nigel

Saw this today of eBay http://cgi.ebay.com.au/datsun-240k-GT-coupe-/160519678925?pt=AU_Cars&hash=item255fb7ebcd

Hi, My spare parts 4 door is blue inside and out, you could always use black vinyl paint. Nigel

The guy I brought my coupe off, said he put 200B struts from his rally car on it (which I removed), I wonder if they are the same part between the 3 cars. also, the S130 2+2 looks like it's got a thicker sway bar, I assume they are not the same shape ?, or are they very similar ? Nigel

Maybe I'm missing something, I'm showing that the shock / coil-over would not fit on the 240K stub / axle, or do you change the whole thing from a S130 ? Nigel

My 4 x 240Ks run this also the disc rotor attaches differently, looks like the S130 slip over the hub, whereas the C110 bolts to the back of the hub Nigel

Are you sure, my 240K shocks don't bolt to the axle like that, Nigel edit: just noticed you are talking about S13s and s130's my bad..

Hi, I got my reply Subject: Re: Otomoto Enquiry - Datsun C110 GTR grill,front lip, rear wing Yes I can supply all of those parts: front grille $400 Flares $330 front lip spoiler $250 rear spoiler $250 I can have them air-freighted to you direct from Japan for $400, which will take 2-4 weeks depending how quickly the factory produces them. Otherwise we can put them in a container and freight to Tas will be $100, but you'll need to wait 8-10 weeks. Cheers On 01/11/2010, at 10:50 AM, Otomoto wrote: The grills a little more than I though it would be, I'll need to save a little more, before I order these. Nigel

I could not find any link either, so I emailed them as well, hopefully they will have what I want at decent price Nigel

It says it's a 1976 model, but if you look at the dash, it has the earlier type air vents, (they are not round like the later models, but the little rectangle ones)

Nice to see it running, any plans for putting a turbo on it ? lots a learning when you go to tune it, unless you taking to a tuner. Nigel

Maybe.. but not me.

It all depends on what you want for it, It would be nice to have a spare coupe, and only a hour and a half away. Nigel

found this ad http://tasmania.gumtree.com.au/c-Cars-Vehicles-Motorbikes-Parts-cars-datsun-240k-coupe-W0QQAdIdZ226432932 Gumtree Adelaide > Cars / Vehicles / Motorbikes / Parts > cars > Ad ID 226432932

Sorry, Fiberglass flares. also gtr lens, have you got his contact details ?

It doesn't have to be fiberglass, but the price has to be good. gtr lights would be nice, but I'm not paying the large asking prices I have seen, I was looking at dying (lens paint) the reverse lens, and find a clear lens (make something fit) for the center reverse light.

I'm after just the standard type, like these pictures, I assume fiberglass would be good enough. on a side note, have you got any equipment to make tail light lenses ? Nigel

Saw some more on ebay, not sure if theses are worth bidding on, since the description says "THESE OVERFENDERS ARE NOT STRAIGHT BOLT ON, THERE IS 40mm DIFFERENCE ON THE FRONT PANEL AND THE REAR ARCH ON A GTR IS MORE ROUND IN SHAPE THAN A 240K" Nigel

What are the coil overs from (front suspension) Nigel

I don't put people in the back, do you ?

I was looking for one of my older post and found this, though I would update it the four door hangers are a bolt on affair, the coupe are welded.. so they did not fit.

saw this earlier today, but it local pick up only.. not much good to me in Tassie..

Another Tassie 240K, what part of the stated are you located ?