Noddle

I'll take a copy of the drawing, I'm doing something different (and still haven't got around to finishing it) is it hand drawn or a .dwg file Nigel

You need to use the search function.. but here you go, been there, done that. http://www.classiczcars.com/forums/showthread.php?t=23632&highlight=alternator down near the bottom Nigel

Hi, Working on my C110 coupe, and having to move it around the yard, I have come to realise that it has a nasty blind spot, so has anyone got a L/H door mirror, the same type as what's on the R/H side (original), or can some one tell me what other cars / models has the same type of mirror. Nigel

The 2 last exhaust hangers (to hold the muffler) are different to, the 4 doors bolt onto the chassis, the 2 door are welded on, and are different.

Any movement on any of these bits ? Nigel

My KHGC110 & HGC110 (Coupe & 4 door) are drums on the rear Nigel

I'm still running my original throttle body, but using the KA24e TPS to connect Megasquirt too, I had to make the little adaptor plate to connect it. Nigel

Hi, I'm after the exhaust hangers (the ones before and after the diff) for my c110 coupe , I'm assume the 4 doors are the same, so if you got a wrecked parts car, leave me a msg Nigel

I do like the wheels, Has anyone got good information on the widest wheels + offset that will fit under a C110 Coupe with flares. (15 inch high) I will have to start looking soon..

This is what's in my '73 Coupe MPH. on the inside, Km/h on the outside. Nigel

This is what babelfish gave me.. http://babelfish.yahoo.com/translate_txt I ask you please for no further mails o.a. My Datsun 240 KGT is sold! Jedwege further answer to me is strictly confidentially treated.

No, I made one up out of copper pipe from my wrecked MR30 Nigel

Found this, in amongst all my saved bits I'm unable to upload it here for some reason, So it one my web site till I run out of room and need to delete it. http://noddle.customer.netspace.net.au/Datsun%20240K%20Wiring%20Diagram%20Black%20and%20White.PDF Nigel

Hi, I'm looking for the wiring diagram for my 1973 240K (Coupe), My "Service Manual Datsun 240K GL Model HGC110 Series" (1976), is different to what my '73 coupe is, especially with the dash connectors, and some wiring to do with the tacho and the coil. but is fine for my '77 4 doors so if anyone got one, please post it, I have a wiring issue, where none of my gauges work, including the tacho, but amp gauge, dash lights, heater, indicators all work fine, I have cleaned and checked the fuses, so I'm a little stumped at the moment Nigel

Spotted this one on ebay 120525325548 but it is a very sorry state. Nigel

If I lived in the States, I would probably have a 240Z, but since I live in Australia, I own a 240K, different car Mate, but it's still a Datsun, I looked here already, I was after the 'heater box' hoses, what you linked to is the bottom Radiator Hose. but if someone else is looking for one Nigel

You need to work out a cost for your parts, also, are you looking at doing the 'over fenders' (flares) ? I know for me, flares, front spoiler, grill maybe badges for the front & rear (are you making these types, as in the picture), inside doors maybe rear bobtail maybe a bonnet but it all depends on the cost. Nigel

My XK Falcon (1961) wouldn't pass then, full metal dash,

Went to my local Holden dealer (they do Nissan here), got a price for the 3 hoses, $18.00, $90.16, $93.04 umm. not going to spend that on some hoses, I have a wrecked MR30 Skyline, I've pulled the heater box from it when I wrecked it, so with some fiddling, hack sawing, this is what I came up with, forgot to take a 'finished' picture, but you see where I'm going. $0.00 and about 30 minutes for the hoses, and about $15.00 for the foam for the seals on the little doors. Nigel

Hi, I'm needing some touch up paint for my coupe, and I need to check to make sure I have the right colour, from searching here It should be Deep Green Metallic #174M http://www.classiczcars.com/forums/showthread.php?t=19837&highlight=163+258&page=2 is this correct ? and what brand of paint were they originally painted in, encase the paint guy asks. Nigel

This one ATM $187 http://cgi.ebay.com.au/DATSUN-240K-GL-NISSAN-SKYLINE-240Z-STEERING-WHEEL-180B_W0QQitemZ300383511608QQcmdZViewItemQQptZAU_Car_Parts_Accessories?hash=item45f040a438 This one ATM $31 http://cgi.ebay.com.au/datsun-240k-gl-skyline-steering-wheel_W0QQitemZ320475428419QQcmdZViewItemQQptZAU_Car_Parts_Accessories?hash=item4a9dd2f643

I can see why this is one is so expensive, it's a 'STEERING WHEEL KIT', see the last word, 'kit', where else the other one is just the wheel Nigel..

So funny, thanks, I needed a good laugh Nigel

you not wrong there, no way I would pay that much for a wheel (but I do have 4) Nigel

Have you tried something like this, you will have to add some more diodes This is what I'm using for my EDIS (waste spark), to make my original 240K tacho work Nigel