KayceeZ

Arne, No, the car has not been sitting for years. I have own the car for a couple of years and drove it a few times each month. About 3 months ago, the car was mis-firing in the same #2 cylinder. I replaced the spark plug and it seemed to solve the problem. Now, a change in the plug makes no difference. I'm getting a charge thru the plug wire, but the #2 cylinder is not firing and I have no compression is this cylinder. Any help is greatly appreciated. KayceeZ

I finally got time to check the compression and cylinder #2 has very little to no compression. This does not sound very good. The remaining cylinders compression was good. Thanks, Kayceez

I have a 1973 240Z and the #2 cylinder is not firing. I have checked the spark plug and the spark plug wire and they seem to be okay. I am concerned that I may not be getting enough spark. What should I try next? Thanks, KayceeZ

I recently bought a 1973 240Z. The prior owner advertised the car as "no rust". Obviously he had not looked under the car in some time. The floor pans have been repaired before and need to be repaired again. I have found floor pan replacement kits on the internet. I'm looking for help in two areas. First, can anyone recommend, from prior experience, a floor pan replacement kit. Secondly, does anyone know of someone in the Kansas City area that install these kits. Thanks!