lan240

Here is the vin 1GTEK19T73Z352205

Does anyone have a carfax account that can run a check on a truck for me. I am Mississippi and there has been a lot of water damaged trucks being slod and I just want to make sure i wont have any problems with this one.

Has anyone used the below site? http://www.cheapcarsearch.com/?hop=nsund

They are proud of that part $101.99

Ok i need a fuel filler hose for my 72 240. Anyone know where i can get one.

Is there a way to replace the throwout fork with out removing the trans?

I checked and can not find a picture of the part number the price is $36 at the dealer each.

I am looking for a set of center caps for my 78z factory rims.

I have a 72 240z and neet the Throttle linkage that connects the linkage from the firewall pivot to the carb linkage. The one that is about 8 inches long with the plastic sockets on both ends. Mine will not stay connected and keeps popping off. let me know if anyone has a spare. Thanks Greg

I am in Madison, MS just outside of Jackson, MS and we were with out power until last night. The situation is so much worse south of me and I can not imagne what people are doing just to make it through the day. The gas shortage is making it harder for people to get back to their homes to start rebulding and getting their lifes back in order.

My first car was a 1977 Toyota Celica GT lift back. That was a fun car to drive.

Here is mine http://www.classiczcars.com/photopost/showphoto.php?photo=15294&cat=500&page=1

Yesterday I had to take a trip down town for work. While driving down I55 in Jackson, MS I noticed a 240SX coming up on me pretty fast. They pulled up beside me and were asking me about my 240Z. Then they pulled out a camera and asked if they could take some pictures of my Z. So here we are going 75 down the interstate while they shot some pictures of my Z. That was a first for me I get plenty of people asking about the car when I go places but never had anyone take pictures of it while driving down the road. I just thought I would share my story with you all.

I neet to get the fuse layout for the fuse box in a 72 240z. I have a blowen fuse and would like to know what it goes to before I replace the bad one to check for any problems.

Can I put a 240 clutch on a 2+2 flywheeel or do I need a different clutch?

i am in the process of changing thee clutch in my 72 240 and the flywheel has some cracks in it. Should i have it surfaced or replace it? If i need a replacment where is the best place to get one. does any have one for sale cheap.

I wouuld like to put a header on but funds are limited right now and I am looking for a quick fix. With my luck if I try to remove the manifold one of the studs will break. If any one wants to donate a header to my cause that would be great

You will have to trim it a little but it will fit very nice. I have a JVC Kameleon in mine and love it. Take your time and make sure you secure the back of the unit to the dash or trans hump. I think there is a picture of mine in my galarey. I need to get a picture of it on since it looks like a blank plate when it is off.

That was my first thought. I was thinking about trying to remove the smog port and putting a bolt in the hole

I have an exhaust leak at the front smog tope on my 72 240. What is the best way to fix it. The tub is cracked right by the nut on the manifold.

Here is a link to a choke lever on ebay http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=46102&item=7917069334&rd=1