jumblies

Thanks Dave. Any advice for getting the GM mount lined up with the RT mount and R200 bolts? I placed the mount when I did the R180 to R200 swap. The RT mount fit perfectly in the tunnel, but the nose was offset about 1" to the front of the hole in the GM mount. I loosened everything and slowly raised the nose. Rearward prying on the diff (tensioning the mustache bar) was needed to get the R200 seated far enough posteriorly. Since people will ask, yes, this was an R200 mustache bar. I had to take the rear control arm hangers and sway bar down to get the bar back in.

Please put me down for one.