1973z240

mm alright dude thanks. id rather spend the extra $ and have a job well done rather than a half arse job

im gonna have an oil change on a 73 240 but it has a 74 engine. for 15 bucks id rather have them do it, than me. the question is how much oil do they put it? cause honestly places like pep boys dont know $^!# bout old z's and frankly i dont either.

the carbs are 70's, they are round ones, not the flat. the engine is 74 the car body is 73 the pistons are almost moving the same. they are a tad off, by like a couple millimeters.

when I get the carbs taking in the same amt of air even, i then test to do the same at 2000 rpm, but i find that the back one takes in wayy much and the front takes in about half of this. how do i fix this? do i turn the balancing screw? i feel like the balancing screw is running out of track to turn and willl fall off.

My Choke keeps on moving back up when i drive and the choke light keeps coming on, so i keep pushing it down, and moves up again in a minute. is there anyway to prevent this. without duct taping the sucker down.

some idiot (previous owner) spilled gas and let it flow on the body around the gas tank, and there is a stain/discoloration there, wondering if there is a way to remove it without repainting. when i waxed it, it did get a little better.

yes this is what im referring to. do they sell those at motorsport auto?

awsome dude. the z i have now i modded for reliability, my old one my grandfather and I built for pure speed and performance

on the passenger's seat door the handle is missing the two caps to cover the exposed bolt on both sides, is this something i can find at motorsport, or is salvage the best place to find it? ill try to get pictures of it up i know my explanation is a little vague.

thanks ill try that ohto find a replacement mast go to http://www.motorsportauto.com/ and click on the Online Store link they have a lot of good parts for the z. thanks once again.

i need to remove and replace the antenna mast on my 1973 240z. first i need to remove it. ive removed the bolt but failed to remove the antenna itself. ive read a section in how to restore your 240z, but it shows how to remove motor but my motor is working fine.

I was thinking of racing my Z. aside from a special liscene what setup/specs do you reccomend to be competitive?