graham53

John If you look at the top of the photo you will see a web site. They have other stuff you might like better.

here it is at 4"

Yes Dave they have different spacing I agree like 4 to 6" would be good

Hey Guys I was thinking of making a new grille (custom) out of this material What do you think????????

I have a rear brake conversion kit on its way. I am told the i need new wheel hubs for this conversion but they were not avaliable new. Is this right and if so where do i get them? thanks

how about this. It might work http://www.dentmagictools.com/gluepuller.htm

thanks What would be the proper offset

I will be putting a set of Eibach springs on my 260. this will lower the car about 1" so i am told. the question is wheel size. this is what I would like. 17x7 4x100 4.5 off 40 front 17x9 4x100 4.5 off 35 rear Will these fit???

had to make my own and print it on a large format

Chris Get this and try it and let me know which is best That's right! Get 4oz of Our "Polish/ Sealer all in 1" to try for $.01 cent plus S/H.

For you guys that like to polish you may want to try this it works great http://gordsaluminumpolish.com/

I will reuse the metal top, replace the masonite. Mine was stapled through the metal. I plan on using a small stainless rivet and grind it smooth on the back with my drimel

thanks E I will have one put together soon and will post a picture

My masonite door panels are not restorable. I have looked and searched to find replacements without any luck. I think after a lot of work i have a pattern to cut my own. I will be making them out of sintra ( 1/8" pvc sheet material) I know someone that will be cutting this pattern on his cnc router. If any are interested i will keep you up to date on how it working. A 260z.pdf

Thanks for the input Enigma I am a designer and it is going to be hard not to do some shaving and Customizing and i think that will be fun and make me happy. I will keep all posted

here is my 260 as I got it. I plan and am working on body, overhall, and interior. It was and is a struggle to decide if i should customize or restore.

Has anyone installed the whistler fuzion in the clock opening?

hey I am a new guy here. Been hanging out for a couple of monthe just searching and reading. I have a new old 260z and am starting the restoration. Had a 260 in 96 and now i am back