Z train

http://www.flashfogsecurity.com/

Storage after opening: put it in a tupperware bowl,label it and keep it in the fridge.

The aluminum can take the heat.Put it in a vise,soak it over night with Liquid Wrench or PB Blaster,cut a slot to fit a large screw driver.Then heat it up good.It SHOULD come out.If not,i would use reverse drill bits.

The 240SX tranny is "clocked" wrong for a L series motor.But all it takes to fix that is the bell/front case from a L series tranny.

1-Set the timing 2-set the idle 3-set the mixture