JSM

You need some black bumpers for her!

Ok that makes sense about the liner I knew that likely there were mounting points for it but other than that I thought everything bolted right up. Sent from my iPhone using Classic Zcar Club mobile

Curious for educational purposes only, what are the differences between the 75-78 fenders?

So I posted a linked photo yesterday and it showed up ok. Will it all of a sudden disappear?

I had this ZX one time...

Should buff out ok? https://miami.craigslist.org/mdc/cto/6193879957.html

Geese now I'm wondering what you offered? Are you going to restore it if you get it? Sent from my iPhone using Classic Zcar Club mobile

Was the 240z on hybrid that was on eBay and BAT to much? I thought I saw you post over there. I think he is a dealer too and could likely arrange shipping.

Where is the red S130 and a red Z31!

Hey did you ever find a car? I know where there is a 78 280z blue that "appears" to be pretty nice let me know I'll PM you the Info. He's asking 10k.

Do this and take a pair of small vise grips and clamp the hose going to it. I've seen them fail without being turned on electrically.

May help to post your location your looking in.

I would change this a little bit. Before removing any fuel lines, just jumper the fuel pump. If it doesn't' work, get a new one first before removing any fuel lines.

That's what she said!!! Giggity!! Couldn't resist.

Have your mechanic go through the trouble shooting section in the FSM. Start with the fuel injection section. Efec.pdf under here: http://www.nicoclub.com/FSM/280z/1982/1982 280zx FSM/ The CHTS can cause havoc on these motors.

75/76 are typically non-webbed and non-egr N42.

Wow thank you. Made me feel normal!

Sometimes ther is slop in the square. I've used a blade screwdriver to take up the slop. Worked great.

It means you should be working instead of surfing!

Always thought these were nice diagrams.

This car was on Craigslist for awhile and then on eBay and I don't think it sold. You can call and see if it's still around. I think he was asking 12 or 13k. This was a screen shot from March 4th.

I'm assuming it has to be worth a minimum of $2K as just a stock shell with little rust. Lots of stuff missing to make a daily driver. The cage looks like it has been hacked and would likely need to be reworked to be certified legal again for ITS. The... (SCCA ITS stuff: coil overs, tokicos, big sway bars, strut bar, adj TC rods, Sunpro gauges, adj brake bias, fuel cell, Holley electric pump) parts used may not have all that much value, but would be a good start for someone wanting to get started in ITS. As it sits, I don't see why you can't ask $4K. It's a very niche market in my mind.

Man I'm with you. Couldn't agree more. On the first drawing, I really don't like the wheel size. It looks to much like a hotwheels care to me.

Did you get that in Orlando? The Chasis looks familiar

... double post.