psdenno

I think we can rule out overheating based on the temperature readings you took. Actual temp is within normal range, gauge reads,high. So, some questions. Did the Z ever run well after you bought it? If so, how long, weeks, months, days? Did anyone check the running condition of the car for you before you bought it? if I remember correctly, you're taking the previous owner's word for what was done to the Z mechanically before you bought it. The engine rebuild was provided by a questionable vendor who has had many complaints about shoddy engine rebuilds in the past. You won't know what's in the engine unless you tear it down and rebuild it - a costly process. I'd suggest looking for an experienced Nissan mechanic and start over if you plan to keep the car. Dennis

If you look at your temperature gauge, you'll see that the numerical range is from an indicated 120 to 250 degrees. That means that the center mark on that scale would be, wait for it, 185 degrees. If your temperature gun reading of 185 on the radiator is an accurate measure of coolant temperature and your dash temperature gauge was accurate, the needle should be at the half way point on the scale, not at 3/4 as you show in the picture. I would suspect an inaccurate temp sending unit or gauge out of calibration and not worry about the reading on the dash gauge. Now, on to the stalling issue. Dennis

A search on this site, and other Datsun Z sites, for "Datsun Parts LLC" and "California Datsun" will bring up earlier message threads that will offer insight into what may be the reason for the engine problems you're experiencing. Shady engine rebuilding history with many complaints of unwillingness to stand behind completed work. Dennis

If you're going for the rubber nipple driving shoes, you'd better plan on also getting a tweed driving cap to match shoes and driving gloves. Got to look coordinated when you play "dress-up". http://www.orvis.com/p/aberford-tweed-driving-cap/7g3y Dennis

Perfect! But, don't forget your string back driving gloves. All sports car fashionista need a good pair of driving gloves. https://www.youtube.com/watch?v=IEzz7BZNbA8 Dennis

Type of event, time of year, and location all need to be taken into consideration. While I've never been a guest of Nissan at an event, I've been the guest of Porsche at events in Germany. My packed wardrobe included sports coat and slacks with nice shoes, tuxedo with appropriate shoes, polo shirts, jeans, and tennis shoes. Porsche provided a new car at the factory for use during the scheduled events which ranged from lectures from company ececs and engineers to hot laps at their test facility, to formal diners in castles, to a road rally. Lots of clothing requirements. My wife's wardrobe also ranged from casual to formal evening wear for the events we attended. Dennis

When I converted my '71 to a five speed transmission, I experienced the same interference with the console. However, I didn't need to trim too much to avoid shift lever contact - not nearly as much as in the pictur e in the previous post. With the shifter boot installed, the cut out is not noticeable. Dennis

Do the heater control levers operate smoothly and feel connected? Dennis

Just came in from shoveling up after my eight month old pup so the gardener can take care of the back yard. Almost as bad as cleaning up after a cow! As for males being easy going.....not in my realm of experience. I seem to always pick the one in the litter that wants to be "Alpha Male". The new Cocker is no exception. Dennis

A little pricey, but FREE shipping. Dennis

I was a little taken back by "conversate", too. So, had to look it up. Learned something new. http://dictionary.reference.com/browse/conversate Next time I'm in Alabama, I'll have to be careful with whom I conversate. Dennis

Almost as good as Friends University of Central Kansas. Check it out next time you're in Wichita/ Be sure to buy a shirt. Dennis

When I have to bring a metal beam back from Home Depot, I generally strap it on the roof. But I guess this works, too. Dennis

$3.95?!?!? How much was shipping and handling - 65 cents? Dennis

Paula Murphy held several speed records driving Studebakers in the early 1960s on the Bonneville salt flats and in coast to coast runs. I'm sure the STP connection goes back to when It was owned by Studebaker and she was a factory driver. Didn't know about the Datsun connection, however. I met her and a couple of the Granatelli brothers about 35 years ago at a Studebaker Avanti event. Quite a lady. Dennis

Keep us posted on progress. I'm within a few months of owning my Z for 45 years and, like your's, it's a work in progress. Stick with It! Dennis

The internet is a powerful persuader. However, rumors have a way of becoming truth if repeated enough. I always like to check out questionable claims about any topic at snopes.com. Go there and type Beneful into the search box. Also check the Beneful web site FAQs. Having recently gotten a pound puppy a few months ago, I asked the Vet for food suggestions. Food and treats which contain corn seem to be the type to avoid. Not always easy to find as corn seems to be a cheap filler in dry dog food. Our previous dog, a beagle, lived quite nicely to 15 on whatever food we gave him and whatever he could sneak off the counter or table when we didn't push things out of his reach. Trying to be a lot more careful with the cocker pup. Dogs do make life more interesting. Dennis

Or inflated four flat tires......

Steering wheel has vented spokes, not solid. Appropriate for a low VIN '70? Nice looking G nose, however, in spite of the modification inaccuracies. I've always liked the look. Dennis

As a couple of us with aftermarket AC have mentioned above....YOU DON'T NEED AN ELECTRIC SOLENOID TO INCREASE RPM. I've been running aftermarket AC on my '71 Z for 43 years without one - 35 years with an ARA system and the last 8 years with a rotary compressor system. If you're concerned about a 200 RPM drop when the AC kicks is, simply adjust the RPM idle speed a bit higher than it is currently. Problem solved. Dennis

Looks like we both had the same question. If OP designates Optional, was it a dealer installed item or did the the factory assembly line guy get to choose? Or was it just a "dress up part" that could be purchased over the parts counter at the dealer? We did that dealer upgrade as a gift for our son's Scion tC. Dennis

Reading the chart, the Applied Model for the skin knob is "OP 4 Speed". What does OP 4 speed mean? Another question about the leather knob some have observed: What emblem does it have - same 4 speed pattern plastic insert as the wood knob or something else? Dennis

I suppose a look through the factory parts manual would answer the question. Anyone got a part number for a leather covered shift knob on the early Zs? Dennis

[quote name="TomoHawk" post="481733" timestamp="1448560097"I'm looking forward to the traditional Thanksgiving meal food: Chicken, fish, lobster, clams, BEER. No tur-duck-en? Dennis

The wood gear shift knob was standard equipment on the early cars. It was NOT an option. You can still buy the wood knobs from Nissan, I believe, but they are new production and somewhat different in wood grain than the 1970s originals. There are threads discussing them in the message archive. Dennis