ChrisZ
Member
-
Joined
-
Last visited
Everything posted by ChrisZ
-
-
Sorry for jacking this thread, what color did the grill come in, mine is painted in body color, should it be black or grey as the tail light sorround. Chris
-
Damn, that's a rare car.:stupid:
-
It should be the same, try to have a look at northern autoparts, you will save $15, i just ordered today, main bearing set STD $43.60 you can also send a mail to rickschroeder(a)northernautoparts.com i can highly recommend them. Chris
-
That was about time Stephen, i can never remember that link. Chris
-
I get your point on this and i don't think it is worth the efford, if you want a long rod motor that can rev, you should de stroke a L28, using crank and rods from a L24. What i know is based on searching, reading and more searching and reading and i have also read some place that milling down dish top pistons will take of some of the strenght, still i have no experience, just a thing i wouldn't do. If you have 9 millimeter L24 rods, they can bring in something like $100, its just what i would do. I'm supriced that no one else have chimed in on this, maybe you will have a better chance of getting a answer if you jump over the fence to hybridz.com, its more the style there, but please fill us in if you have any interesting news on this subject. Chris
-
No brass on my roadster, but they were swapped for some new is 1980 according to the info i have. It would have been nice to have, looks good. Chris
-
You beat me on that one Arne You can also test it with the one from your -73 Chris
-
Search after FSM and there will come a link to the factory service manual. the wire from ignition swich to starter is black/yellow, black/white from switch to ballast resistor, green/white from resistor to tacho/ignition switch. Hope it make sense. You can PM me your mail and i have a PDF with a -73 FSM i can send you. Maybe you should look in to swapping your ignition switch. Chris
-
-
There shouldn't be anything wrong in jumping the coil resistor and starter, the starter can be jumped with a screwdriver. I'm sure Dave will jump in on this one with some good knowledge. Chris
-
2nd that, what cam do the motor have ? Chris
-
-
Below is a picture of a E88 i unfurtunatly didn't buy, and the price was just right. Chris
-
Like Mike B said, post pictures, shouldn't an early 260Z have the smaller bumpers ? Go for the one you like most, in the end you will regred saving money if you buy the 260Z over the 240Z if that is the one you like most (i think so) and if it is because of the distance, you get over it. If you like the 240Z most, make the seller an offer, just choose what you like best. Chris
-
Why do you want to mill down your pistons, is it to save money ? i would advice you not to go that way, if the rods is from your original L24 and it is a matching block, you should keep it as is with the car. Flat top pistons can be purcased for a price around $200 and you can have your cam send out for re grind at Delta for a price in the $80-90 area, you will not want to use the turbo cam in a N/A motor. I recently got pistons from Northernautoparts.com send Rick Schroeder a mail and he can give you a quote rickschroeder(a)northernautoparts.com. Unless you use a BIG cam you will be fine with stock carbs and manifold, maybe get some other needles. Chris Some cam specs FYI http://www.atlanticz.ca/zclub/techtips/cam/index.htm
-
Yeahr, that's a members car, can't remember his name. Chris
-
User CP - signature !.... Why not use this board and search for parts, parts can be shipped, tell me how i know. Chris
-
Your damn right i am, you don't post that much here, i bet the roadster take up all your time, it's looking good and almost complete. Chris
-
Bling-bling What did you use to clean them with, Dave Chris
-
Yeahr Stephen but not on 311.org. Chris
-
Hmmm. have been better, but not as bad as in the states, actually it's kind of a farce, the stock marked, house sale marked and the banks are hit, but PPL have the excact same money now as they had a year or two ago, the food prices and gas has gone down and the intrest haven't gone that much up, still PPL have been scared by the news and are holding on to there money, i think it's just a matter of time before they realize it and start spending. Chris
-
Why don't you jump over here: http://www.311s.org/ and have a look, dbrink have one in the Classifieds you might want to check it out. Datsunrides/Mark i didn't know you have a Zed. Chris
-
If you want to go FI then remember to get all what's needed, harness, ECU etc. Chris
-
, maybe she should be moved to the boobs topic:laugh:
