ukzman
Member
-
Joined
-
Last visited
Everything posted by ukzman
-
If you do get the opportunity to get on track with your car you won't regret it Its the most fun you can have with your clothes on! -
Not actually a "lap" but here's my most recent run up Shelsley Walsh hill climb in Worcestershire, its only about 1000 yards long but it gets a bit tight in places.......
-
Cheers for that Rahail, think I'll stick with the OEM one for now
-
Looking very good Rahail Where did you get the 10K tacho from?
-
-
-
Where in the UK did you get your Bilsteins and are they standard length or shortened? Regards Tim
-
Hi Ed, I'm hoping to use the car for track days and possibly sprinting, as for power I'd like 190 at the wheels but I think thats being very optimistic on my part, 165ish maybe a little more is going to be closer to the real figure I think Tim -
-
-
-
-
Hi Jim, Its the Nismo Race Damper Tim -
-
-
I made the pointer myself, just cut part of the anti rattle plate to length ground a point on one end and put a double bend at the other end to pickup on the standard pointer mounting Tim
-
New timing pointer made from an old brake pad anti rattle plate!!
-
New timing pointer made from an old brake pad anti rattle plate!! -
I used Rustoleum Red Oxide Primer, at the time I could'nt find any G.E. but my local hardware store had the Red Oxide on the shelf, on page 16 of the How To Modify Your Nissan/Datsun OHC Engine it states you can use it, Red Oxide, or G.E. Tim -
I cheated on the hardware, a local company replated them for me, shoebox full of nuts/bolts/washers/small brackets all for £20, (approx. $36) -
-
Hi Dan, What started out as a straight forward engine out to swap a crank and freshen up turned into a much more indepth and drawn out job than I expected Tim -
-
Thankyou, its never going to win any prizes for the best looking cable conversion but it is simple and effective Tim -
The carbon still on the valves will be removed in due course, :-) Tim
